B_real
Member
- First Name
- Bento
- Joined
- Sep 9, 2019
- Threads
- 2
- Messages
- 10
- Reaction score
- 3
- Location
- Netherlands Antilles
- Vehicle(s)
- 2017 Cosmic Blue Civic Touring
- Vehicle Showcase
- 1
- Thread starter
- #1
I was driving home a 30min ago when a guy with a GTI wanted to race with me. I was on ktuner map 1 and switch to map3 (OTF). When i did floor it a couple of seconds after my tire starts spinning i felt a throttle pull back and all the light in my dash came on. i pulled over and turn the car off and the on (2x) but all the lights stayed on (power steering system problem, brake hold system problem, VSA problem, hill start assist problem, RDM system problem, barke sysrem problem, emission problem, check engine). when i went to change back to map 1 i saw that the car was already in map 1.
So a arrive at home and scan the car a got these error codes:
- cylinder 1 misfire, cylinder 3 misfire, random and multiple cylinder misfire.
- fuel rail pressure high.
the car has 22742miles on it.
anyone knows how to remove these lights and what could have happened (870 miles with the car flash, drive mostly in map1 and eco on)
So a arrive at home and scan the car a got these error codes:
- cylinder 1 misfire, cylinder 3 misfire, random and multiple cylinder misfire.
- fuel rail pressure high.
the car has 22742miles on it.
anyone knows how to remove these lights and what could have happened (870 miles with the car flash, drive mostly in map1 and eco on)
Sponsored