Cusco power brace compatability

[321dormot]

According to a cusco blog post ( http://blog.cuscousainc.com/honda-civic-type-r-cusco-parts-list/ ), the cusco power braces made for the fk8 are also compatible with the fk7 sport variants. Can anyone confirm this?

Sponsored

 

[321dormot]

Nevermind, just the center and front power braces are. The rear power brace for the fk8 won't fit an fk7 sport.

 

[bluehatch17]

I own the rear bar. It fits fine. It only fits on sport/sport touring with center exhaust on a fk7.

 

[321dormot]

I own the rear bar. It fits fine. It only fits on sport/sport touring with center exhaust on a fk7.

Do you use all 4 mounting points?

 

[bluehatch17]

https://www.civicx.com/forum/threads/what-did-you-do-to-your-civic-today-ii.14492/post-784502

 

[hondabandit]

I have all 3 installed on my car. All four bolts go on the rear subframe without any problems.

 

[Ji671]

I have all 3 bars as well, but I got the regular bar for the rear because I didn't have the middle bracket.

I should of taken a picture of the front bar because of a fitment issue. If you have a sport you need to get the type r front power brace because of the placement of the bolts to the subframe. But next to the driver side subframe bolt is the intake resonantor. If you have a cold air intake it's no problem because you probably took out the whole assembly. I have a short ram so all I did was take out the bottom bolt that holds the housing.