My immediate go-to would be the caliper. I would check to make sure that the two bolts connecting it to the hub are properly tightened.Hi,
Could anyone figure out what this clunking sound could be?
Front driver side damper has already been replaced.
I had the same sound it was my lower ball joint on the knuckleMy immediate go-to would be the caliper. I would check to make sure that the two bolts connecting it to the hub are properly tightened.
It's ironic that this thread popped back up, since I just dropped off a replacement bushing for the control arm compliance mount at my local shop. Control arm was clunking around in the housing, since the bushing was blown out.I had the same sound it was my lower ball joint on the knuckle
Driver side or passenger side?It's ironic that this thread popped back up, since I just dropped off a replacement bushing for the control arm compliance mount at my local shop. Control arm was clunking around in the housing, since the bushing was blown out.
Control arm bush does not start noise in one day.Driver side or passenger side?
In my case, it was the passenger side.Driver side or passenger side?
It does when you blast off the track at triple digit speeds and go off-roading. ?Control arm bush does not start noise in one day.
I have this same noiseI got a similar issue.
Any suggestions on how to fix it?
Thank you!
Have you solved the problem?I have this same noise
Still have the problem but it drives fine...Have you solved the problem?