It will but it'll poke out too much. Will rub on dips.19x9.0 / 5x120 / Offset +20
19x10 / 5x120 / Offset +22
255/35/19
Can anyone confirm this will work on stock suspension ?
Nice.hello there,changed my wheels
BBS RS-GT 19x8.5J ET35
Very fittment.
All stock suspension,so no rubbing.
I ordered ADVAN GT 19",need waiting a long time.
this is such a wrong setup!!! not only will you introduce quite a bit of understeer in corners but you'll upset the torque vectoring of the front suspension algorithms.19x9.0 / 5x120 / Offset +20
19x10 / 5x120 / Offset +22
255/35/19
Can anyone confirm this will work on stock suspension ?
Thanks bro. I wasn't doing this for looks it just that I have this free set of RZDF I want to use . I will put the 19x10 in the front and try some RSRR for test fit. If the 19X10 doesn't fit the front I'll just put it on the 19X9 only for the weekend canyon run . What do you think ?this is such a wrong setup!!! not only will you introduce quite a bit of understeer in corners but you'll upset the torque vectoring of the front suspension algorithms.
i strongly suggest not doing this, forget the rubbing or not. in fact wider rear than front is the opposite setup for a fwd car and should actually be wider front than rear to enable rear to turn in better.
if you're doing this for looks then i have to say it's the wrong approach.
i suggest trying out in parking lot and make some turns before going on street and feel difference.Thanks bro. I wasn't doing this for looks it just that I have this free set of RZDF I want to use . I will put the 19x10 in the front and try some RSRR for test fit. If the 19X10 doesn't fit the front I'll just put it on the 19X9 only for the weekend canyon run . What do you think ?
Hey rydereclipse! Can you please post a side profile of your car? I just want to see how it's dropped on Eibachs. I have the same wheels in that same spec and same tire size so I'm quite curious.Personally, I run 275/35 on 18 x 9.5 w/45 offset (VMR 701's) with no rubbing...you "should" be able to run 265's with a 35 offset..but every tire fitment is slightly different, what works for me may not work for you. I am lowered on Eibach's Prokit as well.
In as far as the xx/40 clearance..once again you "should" be able to run that tire height with no problem, but I would not if the car is lowered at all.
Amending my statement...I see you have a EX Hatchback..my advice is/was specific to my limited CTR experience..Your Mileage May Vary..
I need to get around to removing that loli see the penske sticker in graham rahal's shop lol...
Wanted to thank Kamispeed again for this awesome set up! 18x9+50 Volk TE37 Saga's
My Planes, Trains, and Automobiles tribute lol