Advertisement



Civic Type R After-market Wheel Guide

Kami Speed

Elite Sponsor
First Name
Billy @ Kami
Joined
Jul 27, 2017
Messages
560
Reaction score
684
Location
Orlando, FL
Website
www.kamispeed.com
Car(s)
2013 Honda CR-Z & 2006 Honda S2000
Country flag
Hey guys,

lets see your aftermarket wheels! I'll start off with OEM specs:

Diameter: 20
Width: 8.5
Offset: +60 mm
PCD: 5x120

Weight: 29.1 (courtesy of GrahamRahalPerformance)

Lug-Nuts: M14x1.5
Hub: 64.1 mm

Modulo MR-R02 20x8.5 +60 Championship White

HRE FF15 20x9.5 +42 Bronze

Volk Racing TE37 SAGA 18x9.0 +50 Bronze
- Kami Speed Shiro Edition

HRE Forged R101 20x9.5 +45 Bronze

HRE FlowForm FF15 19x9.5 +42 Liquid Silver

Volk Racing TE37 SAGA 18x9.0 +50 Diamond Dark Gunmetal

Volk Racing ZE40 19x9.5 +45 Diamond Dark Gunmetal

Work M.C.O. Racing Type CS 18x9.5 +35 Red

Volk Racing ZE40 19x9.5 +45 Bronze
- Another Example
- Another Example in Diamond Dark Gunmetal

Enkei Tuning T6S 18x8.5 +35 5x120 Black

Motegi MR116 18x8.0 +45 Black / Red Ring

Enkei Tuning Raijin 19x8 +42 5x120 Black

Konig Ultraform 18x8.5 +38 Gunmetal

Gram Light 57Transcend 18x9.5 +35 Super Dark Gunmetal

Advan Racing GT 18x10.5 +35 / 18x9.5 +35 Racing White

Motegi MR133 18x9.5 +45 Black

VMR V701 18x9.5 +45 Bronze

Titan 7 T-S5 18x9.5 +35 5x120 Satin Titanium

Acura NSX Front OEM Wheel 19x8.5 +55
- Mounted
- Another Example
- NSX Wheels: Gloss Black

OZ Alleggerita HLT 18x8.5 +40

Volk Racing ZE40 18x9.5 +40 Bronze

BBS RF 521 Series 18x9 +47

Advan Racing RSII 19x9.5 +50 Racing Hyper Black

Bremmer Kraft 19x8.5 +45


Volk Racing ZE40 19x8.5 +35 in Diamond Dark Gunmetal

WedsSport RN-05M 18x9.5 +36 Gloss Black

ESR SR08 18x9.5 +35 Bronze (Work CR Kai Design)

Volk Racing TE37 Saga 18x9.5 +45 Bronze
- Another Example in Mag Blue
- Another Example in Bronze
- Another Example in Red

Volk Racing CE28N 18x9.5 +42 Bronze

Volk Racing G25 19x9.5 +50 Hyper Gold

OZ Leggera HLT 19x8.5 +47 Silver

Volk Racing TE37 18x10 +41 Bronze

WedsSport RN-05M 18x9 +50 Gloss Black
- Another Angle

Konig Ultraform 19x9 +35 Gunmetal

Advan Racing TCIII 18x9 +35 / 18x8.5 +35 Reverse Stagger in Hyper Silver

SSR GTX01 19x9.5 +38 Blue Gunmetal
- Another example
- Another Example in Custom Red
- Factory Dark Silver

VMR V701 19x9.5 +45 Gunmetal

Desmond Regamaster Evo2 18x9.5 +45 Silver
- Another Example
- White

Rotiform KPS 19x9.5 +35 Black

BMW M3/M4 18's 18x9 +29 / 18x10 +40

Enkei YS5 18x8 +42 Black

Enkei RSM9 19x9.5 +45 White

GramLight 57CR 18x9.5 +38 Gloss Black
-Another Example
- Gunblue II
- Gunblue II

Work Emotion CR Kiwami GT-Silver 18x9.5 +38

Konig Ampliforms 18x9.5 +35

Volk Racing TE37SL 18x9.5 +38 Pressed Double Black
-Flat Black

Enkei GTC01RR 18x9 +50 Gunmetal

Volk Racing TE037 6061 19x9.5 +36 Formula Silver

Enkei NT03RR 18x9.5 +45

VMR 705 18x9.5 +45 Bronze

Enkei Ammodo 18x8 +32 Gold

Volk Racing TE37 Saga Reverse Staggered 18x10 +34 / 18x9.5 +45 Bronze

Axis Model 5 Gunmetal 18x8 +42

Enkei Dracos Anthracite 18x8 +35

Volk Racing CE28SL 18x9.5 +44 Pressed Graphite

Focal F04 18x8 +48

Volk Racing TE37 18x9.5 +38 Bronze

Titan7 T-S5 19x9.5 +45 Satin Titanium

Volk Racing CE28SL 18x9.5 +35 Pressed Graphite

WedsSport RN-55M 18x9 +45 Gloss Black



Advertisement


 
Last edited:
OP
Kami Speed

Kami Speed

Elite Sponsor
First Name
Billy @ Kami
Joined
Jul 27, 2017
Messages
560
Reaction score
684
Location
Orlando, FL
Website
www.kamispeed.com
Car(s)
2013 Honda CR-Z & 2006 Honda S2000
Country flag
  • Thread starter
  • Thread Starter
  • #2
exterior-04_1280x1024.jpg


img_main_01_01_sp.jpg


MODULO MR-R02
Diameter: 20
Width: 8.5
Offset: +60 mm
PCD: 5x120
Finish: Championship White
Weight: 24.5 lbs
 
Last edited:
OP
Kami Speed

Kami Speed

Elite Sponsor
First Name
Billy @ Kami
Joined
Jul 27, 2017
Messages
560
Reaction score
684
Location
Orlando, FL
Website
www.kamispeed.com
Car(s)
2013 Honda CR-Z & 2006 Honda S2000
Country flag
  • Thread starter
  • Thread Starter
  • #5
Need some 19 inch ce28s in bronze! Make it happen.
So 19-inch CE28N's were discontinued a few years back, we can pretty much bring back any wheel with a batch order (20 piece order) but it would have to be one size one finish. I can make it happen just let me gauge what ppl like sizing wise and stay tuned to our Vendor Forum :beer:
 

y4ngel

Senior Member
Joined
May 31, 2017
Messages
190
Reaction score
207
Location
Charlotte, NC
Car(s)
2017 CW CTR
Country flag
So 19-inch CE28N's were discontinued a few years back, we can pretty much bring back any wheel with a batch order (20 piece order) but it would have to be one size one finish. I can make it happen just let me gauge what ppl like sizing wise and stay tuned to our Vendor Forum :beer:
Sounds good, I am no wheel expert and don't know anything about importing or special ordering wheels. But I think if you can get a batch of the following they will sell.

Bronze and Diamond Black CE28N with a nice concave in one of the following sizes:
19x9.5 +42mm 5x120
19x9 +37mm 5x120

This is of course all my personal opinion :)

85cf6868977fa1178962ef193fbe8787.png


8cf15bfe11e568eb8935fc01f826ea0f.png
 
OP
Kami Speed

Kami Speed

Elite Sponsor
First Name
Billy @ Kami
Joined
Jul 27, 2017
Messages
560
Reaction score
684
Location
Orlando, FL
Website
www.kamispeed.com
Car(s)
2013 Honda CR-Z & 2006 Honda S2000
Country flag
  • Thread starter
  • Thread Starter
  • #7
Sounds good, I am no wheel expert and don't know anything about importing or special ordering wheels. But I think if you can get a batch of the following they will sell.

Bronze and Diamond Black CE28N with a nice concave in one of the following sizes:
19x9.5 +42mm 5x120
19x9 +37mm 5x120

This is of course all my personal opinion :)

85cf6868977fa1178962ef193fbe8787.png


8cf15bfe11e568eb8935fc01f826ea0f.png
Already working on 19x9.5 +42 or +35 5x120. CE28N were never made in 19x9 so that would require a specific CAD design for that size to make sure it meets all their JWL Spec 2 standards on top of a new mold, so we'd likely require more than just 5 sets lol.

Since 19x9.5 +42 and +35 were made in the past we just have to make sure the 5x120 PCD doesn't change the structural composition and double check that it clears the Brakes (more so that the spokes don't hit the caliper). Besides that once I get the green light I'll be doing a group buy for Bronze.
 

y4ngel

Senior Member
Joined
May 31, 2017
Messages
190
Reaction score
207
Location
Charlotte, NC
Car(s)
2017 CW CTR
Country flag
Already working on 19x9.5 +42 or +35 5x120. CE28N were never made in 19x9 so that would require a specific CAD design for that size to make sure it meets all their JWL Spec 2 standards on top of a new mold, so we'd likely require more than just 5 sets lol.

Since 19x9.5 +42 and +35 were made in the past we just have to make sure the 5x120 PCD doesn't change the structural composition and double check that it clears the Brakes (more so that the spokes don't hit the caliper). Besides that once I get the green light I'll be doing a group buy for Bronze.
Awesome! I don't think the +35 will actually fit for the 19, I know it barely fits for the 18 and may have problems with the fenders on the 19 with a 265/35 tire. I think +42 would be the safe bet, of course I don't have wheels to test fit like you guys would :headbang:
 
OP
Kami Speed

Kami Speed

Elite Sponsor
First Name
Billy @ Kami
Joined
Jul 27, 2017
Messages
560
Reaction score
684
Location
Orlando, FL
Website
www.kamispeed.com
Car(s)
2013 Honda CR-Z & 2006 Honda S2000
Country flag
  • Thread starter
  • Thread Starter
  • #9
Awesome! I don't think the +35 will actually fit for the 19, I know it barely fits for the 18 and may have problems with the fenders on the 19 with a 265/35 tire. I think +42 would be the safe bet, of course I don't have wheels to test fit like you guys would :headbang:
lol +35 will be that aggressive fit but I'm sure that may be someone's cup of tea, I'm leaning for +42 but if we get enough interest in both there's no reason why we can't have both ordered in :D
 

revin9k

Senior Member
Joined
Oct 10, 2016
Messages
251
Reaction score
372
Location
boonies
Car(s)
s2000
Are you guys looking at any gram lights, or advans? They both have a few 18 or 19x9.5 +35/38 options that already come in 5x120. The 57Transcend looks great.
 

jonnys_honda

Senior Member
First Name
Jonny
Joined
Mar 1, 2017
Messages
1,916
Reaction score
2,810
Location
Ossining, NY
Car(s)
2017 Civic Type R #1288
Vehicle Showcase
2
Country flag
Are you guys looking at any gram lights, or advans? They both have a few 18 or 19x9.5 +35/38 options that already come in 5x120. The 57Transcend looks great.
57Transcend is heavier than the 57CR in the same size and offset.
 
OP
Kami Speed

Kami Speed

Elite Sponsor
First Name
Billy @ Kami
Joined
Jul 27, 2017
Messages
560
Reaction score
684
Location
Orlando, FL
Website
www.kamispeed.com
Car(s)
2013 Honda CR-Z & 2006 Honda S2000
Country flag
  • Thread starter
  • Thread Starter
  • #12
Are you guys looking at any gram lights, or advans? They both have a few 18 or 19x9.5 +35/38 options that already come in 5x120. The 57Transcend looks great.
so we've mostly gotten requests for Volks, but we did have some inquiries on Advans. GramLights 57CR are going to be released 18x9.5 +38 5x120 with confirmed Brembo clearance, and yes you are right the 57Trascend are a great option as well. They also just released the 57ANA but the jury is still out on this one:

33461829143_d41c522cf1_b.jpg
 

revin9k

Senior Member
Joined
Oct 10, 2016
Messages
251
Reaction score
372
Location
boonies
Car(s)
s2000
so we've mostly gotten requests for Volks, but we did have some inquiries on Advans. GramLights 57CR are going to be released 18x9.5 +38 5x120 with confirmed Brembo clearance, and yes you are right the 57Trascend are a great option as well. They also just released the 57ANA but the jury is still out on this one:

33461829143_d41c522cf1_b.jpg
Wow those look great IMO. I'd definitely be interested in that wheel with a concave face at +35-38. It's been confirmed a few times that +35 should fit with no issues. I've yet to see any pics though
 
OP
Kami Speed

Kami Speed

Elite Sponsor
First Name
Billy @ Kami
Joined
Jul 27, 2017
Messages
560
Reaction score
684
Location
Orlando, FL
Website
www.kamispeed.com
Car(s)
2013 Honda CR-Z & 2006 Honda S2000
Country flag
  • Thread starter
  • Thread Starter
  • #15
@Kami Speed Tagged you guys in our facebook group page, not sure if you can see it but there's definitely interest :)

https://www.facebook.com/groups/CTRONA/

https://i.gyazo.com/365f54bd1ebb0a5aef977ed18ae9c73c.png
Sent a request to get added to the group! Don't have access as the company but I can go in personally.


Wow those look great IMO. I'd definitely be interested in that wheel with a concave face at +35-38. It's been confirmed a few times that +35 should fit with no issues. I've yet to see any pics though
19x9.5 +42 with Face-2 is available lol, well we'd have to order them in but you can pre-order them
 

Advertisement






Advertisement




Top