center part of the wing removal ?s

[CivicR316]

can any one help me with removing the center part of the wing i been searching on hear and can't find anything or if any one can point me in the right direction to a thread that would be great i got a envasive carbon wing and i can't seem to figure out how to get the oem one off thanks

Sponsored

 

[ChampwhiteFK8]

http://www.collegehillshonda.com/instructions/civic/2017/typer/tailgatespoiler.pdf

Here you go

 

[CivicR316]

thanks man appreciate it thats going to make my job so much easier

 

[Boarshead77]

I believe you can remove the center piece without taking the side pieces off. I haven’t tried it, but someone mentioned it in the Facebook North America Owner’s page...

 

[00057]

I believe you can remove the center piece without taking the side pieces off.

It is possible, I did my OEM Carbon Fiber Wing install without removing the side piece. All good, complete the install in under 20 minutes.
**Note, I did use blue tape to prevent any scratches.

 

[fk8jon]

It is possible, I did my OEM Carbon Fiber Wing install without removing the side piece. All good, complete the install in under 20 minutes.
**Note, I did use blue tape to prevent any scratches.

That's a little concerning, if it can be removed without accessing the inside of the trunk this will probably lead to a lot of missing CF middle pieces...

 

[00057]

That's a little concerning, if it can be removed without accessing the inside of the trunk this will probably lead to a lot of missing CF middle pieces...

Yeah, this piece is vulnerable.

i suggest to change out the philips bolts to some other bolts

If I recall correctly the Carbon Fiber OEM Wing comes with hardware with new hardware but its nothing special. Some tamper / security fasteners would at least be a deterrent.

 

[ElGateKeeper]

Anyone know who makes this wing?

Sponsored