Carbon fiber and Kevlar hybrid bumper grills

Learn2turn

Senior Member
First Name
Christopher
Joined
Nov 26, 2018
Messages
440
Reaction score
184
Location
Rio Rancho NM
Car(s)
'05 Tuned Gran Prix White S2000, '19 Championship White C-Type R
Country flag
Hello fellow enthusiasts,

I am still cutting the templates out for the Type R but have some choices of composite solutions to this issue. I am the Director of HP Motorsports that was only born on 5/24/19. I welcome all who want to be involved and there will be an early bird price for everything we produce. I am connected with the highest quality composite company using a proprietary method of carbon and hybrid layouts. The first inserts will be RED KEVLAR/CARBON WEAVE. I will post a picture tomorrow and can customize the cutouts for directive airflow. (just talk to me)

We will also be using the incredible tech advancements of HP 3D printing to make more products soon. PM me if you want to be apart of it.

Get friendly with cars :)

***** UPDATED ******

Here is the breakdown...

These are one off handmade pieces like a carved statue and as such each one is slightly unique, they will be customized to your personality/requests and they are very labor intensive! I will start with a new factory piece and customize your choice of carbon fiber insert with whatever type of vent that you want. I AM OPEN to trade talks/business negotiations.
:thumbsup:

The front custom pair are $1000 and the rear pair are $850.
The Whole car will be $1600.

Options/Variables :drive:
You send me your stock pieces? $85 less per piece.
No vents? $75 less per piece.
If you are creatively artistic and have a LOT OF TIME and TOOLS and PATIENCE and are willing to DIY the project, I will work with you to create a customized kit for your needs including tutorial, after sale support and your custom carbon fiber insert for $120 per grille insert.

Hug your Honda, remove the ugly fake crap



Advertisement


 
Last edited:
OP
Learn2turn

Learn2turn

Senior Member
First Name
Christopher
Joined
Nov 26, 2018
Messages
440
Reaction score
184
Location
Rio Rancho NM
Car(s)
'05 Tuned Gran Prix White S2000, '19 Championship White C-Type R
Country flag
  • Thread starter
  • Thread Starter
  • #3
OP
Learn2turn

Learn2turn

Senior Member
First Name
Christopher
Joined
Nov 26, 2018
Messages
440
Reaction score
184
Location
Rio Rancho NM
Car(s)
'05 Tuned Gran Prix White S2000, '19 Championship White C-Type R
Country flag
  • Thread starter
  • Thread Starter
  • #6
Were did you get that material
I am working with a Carbon fiber/composite company. That is a red kevlar/carbon weave and it can be sourced with some googling. I am working on a kit or package to sell.
 
OP
Learn2turn

Learn2turn

Senior Member
First Name
Christopher
Joined
Nov 26, 2018
Messages
440
Reaction score
184
Location
Rio Rancho NM
Car(s)
'05 Tuned Gran Prix White S2000, '19 Championship White C-Type R
Country flag
  • Thread starter
  • Thread Starter
  • #7

slowride

Senior Member
Joined
Jan 7, 2016
Messages
917
Reaction score
595
Location
Midwest
Car(s)
2018 PMM Type-R
Country flag
A vast improvement in looks is a matter of opinion, but those flat surfaces are going to take an absolute beating on the road (see cracked Honda CTR badges). How many miles are these tested under and what is warranty consideration?
 

tuxmonkey

R-00330
First Name
Mike
Joined
Oct 3, 2016
Messages
637
Reaction score
461
Location
Houston, TX
Car(s)
'17 Civic Type R #330, '17 Jeep GC Overland
Vehicle Showcase
1
Country flag
Hello fellow enthusiasts,

I am still cutting the templates out for the Type R but have some choices of composite solutions to this issue. I am the Director of HP Motorsports that was only born on 5/24/19. I welcome all who want to be involved and there will be an early bird price for everything we produce. I am connected with the highest quality composite company using a proprietary method of carbon and hybrid layouts. The first inserts will be RED KEVLAR/CARBON WEAVE. I will post a picture tomorrow and can customize the cutouts for directive airflow. (just talk to me)

We will also be using the incredible tech advancements of HP 3D printing to make more products soon. PM me if you want to be apart of it.

Get friendly with cars :)
This is something I have been looking for since day 1. Sending PM.
 

CW20038TypeR

Senior Member
First Name
Franklin
Joined
Nov 17, 2018
Messages
275
Reaction score
147
Location
Los Angeles
Car(s)
CW type r 2018
Country flag
A vast improvement in looks is a matter of opinion, but those flat surfaces are going to take an absolute beating on the road (see cracked Honda CTR badges). How many miles are these tested under and what is warranty consideration?

Yeah depending on the thickness those are going to be pelted to shjt and cracked

I rather have a proper replacement mesh
 

17CivicTypeR_Brian

Aiming for 400whp out of the TypeR.
Joined
Oct 14, 2015
Messages
3,639
Reaction score
2,765
Location
York PA USA
Car(s)
'17 Black CTR #4071, 16 MDX Tech
Country flag
sooooo totally different direction but...can you do any gauge pods to replace the top of the steering column, or the top piece above the gauge cluster or the cluster bezel?
 
OP
Learn2turn

Learn2turn

Senior Member
First Name
Christopher
Joined
Nov 26, 2018
Messages
440
Reaction score
184
Location
Rio Rancho NM
Car(s)
'05 Tuned Gran Prix White S2000, '19 Championship White C-Type R
Country flag
  • Thread starter
  • Thread Starter
  • #12
sooooo totally different direction but...can you do any gauge pods to replace the top of the steering column, or the top piece above the gauge cluster or the cluster bezel?
Yes sir, I do believe that is doable. I will look at that this evening.
 
OP
Learn2turn

Learn2turn

Senior Member
First Name
Christopher
Joined
Nov 26, 2018
Messages
440
Reaction score
184
Location
Rio Rancho NM
Car(s)
'05 Tuned Gran Prix White S2000, '19 Championship White C-Type R
Country flag
  • Thread starter
  • Thread Starter
  • #13
The sun was not as cooperative as I hoped but CLEARLY the ugly is gone :)
IMG_20190609_180019.jpg
IMG_20190609_180722.jpg
IMG_20190609_180759.jpg
IMG_20190609_181030.jpg
 
OP
Learn2turn

Learn2turn

Senior Member
First Name
Christopher
Joined
Nov 26, 2018
Messages
440
Reaction score
184
Location
Rio Rancho NM
Car(s)
'05 Tuned Gran Prix White S2000, '19 Championship White C-Type R
Country flag
  • Thread starter
  • Thread Starter
  • #15
Looks really good! I do not plan on getting an oil cooler. Could you make some without the cutouts?
I PMed you back.
Yes I could make them solid or any type of opening someone wants.
I could even make it swing open at speed only.:dance:
 

                           

Top