miana79
Senior Member
- Joined
- Jan 20, 2017
- Threads
- 2
- Messages
- 55
- Reaction score
- 11
- Location
- Toronto Canafa
- Vehicle(s)
- Mazda 3
- Thread starter
- #31
NiceInterior console upgrade.
Sponsored
NiceInterior console upgrade.
When you did the red wrap trims , did you pull anything out or you just put the wrap on top and tucked it in with a squeegee/card ? Going to attempt to do something similar and want to do it properly . Also has it pealed / any tips on some pain in the back trim pieces ? Thanks!Here are a couple more shots
See attached pics and how the backside looks , I just pressed in by hand , it's a very tight fit for the majority of the areas I did. I don't think it will come out at all. The door area where I did was to loose and I had to put thin double sided tape on the back side to hold it in. No removal of anything, just press in.When you did the red wrap trims , did you pull anything out or you just put the wrap on top and tucked it in with a squeegee/card ? Going to attempt to do something similar and want to do it properly . Also has it pealed / any tips on some pain in the back trim pieces ? Thanks!
Oh okay! I am planning on vinyl wrapping it . I see you used different stuff . Where did you get that and is it meant for our civic/ just happens to fit ?See attached pics and how the backside looks , I just pressed in by hand , it's a very tight fit for the majority of the areas I did. I don't think it will come out at all. The door area where I did was to loose and I had to put thin double sided tape on the back side to hold it in. No removal of anything, just press in.
It's off my buying page I think this was itOh okay! I am planning on vinyl wrapping it . I see you used different stuff . Where did you get that and is it meant for our civic/ just happens to fit ?
Would you mind PM'ing me some more close up pictures of yours ? If my wrap totally doesn't work out I might go for this . Thanks man.It's off my buying page I think this was it
http://www.ebay.com/itm/162121418611?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
It's got a nice dark red chrome look, looks nice.
How did you go about removing those pieces to dip it ? Thinking about wrapping it and I don't want to break it trying to take those off . Thanks in advance!
I used some plastic trim pullers. Don't use anything metal or you'll damage things when pulling interior pieces. You have to pull the radio out to get the big one and the little one in the middle out. I found this helpful video for pulling the radio out. My push-in retaining clips were REALLY tough to disengage. I had to pull pretty good on the radio to get it out.How did you go about removing those pieces to dip it ? Thinking about wrapping it and I don't want to break it trying to take those off . Thanks in advance!
I was really hoping I didn't have to take the radio out :/ . Maybe this will be a project for later on during the summer . Thanks for the reply!I used some plastic trim pullers. Don't use anything metal or you'll damage things when pulling interior pieces. You have to pull the radio out to get the big one and the little one in the middle out. I found this helpful video for pulling the radio out. My push-in retaining clips were REALLY tough to disengage. I had to pull pretty good on the radio to get it out.
Where did you get the turbo badge? I really like it And what's on your vent? Air freshener?I put a turbo badge inside ....... looks sick
Soon to come will be red trims along the front.
I can't wait. Waiting for it to arrive from ebay.
I got the badge from ebay.Where did you get the turbo badge? I really like it And what's on your vent? Air freshener?