Camber specs on a lowered 2016 Ex sedan

[Gusgus777]

So I just installed H&R lowering springs ( 1.25 drop in front and 1.0 drop in rear) and Godspeed camber arms in the rear. So I went to go get aligned and when I drove off I saw that the rear tires have a -3.2 camber. It seems very aggressive to me for being a street only daily driver. Do you guys know if this rear camber will cause excessive wear on the inside of my tires and was the tech being lazy or is that I need more than just to camber arms to get into spec.

 

[L8apex]

It seems like they didn’t bother adjusting the camber. You should be much closer to spec with a rear camber kit.

 

[Hondanickx]

It seems like they didn’t bother adjusting the camber. You should be much closer to spec with a rear camber kit.

Yup seems like it yes .I think the camber arms where not adjusted to stock specs and actually added camber in the rear.If they adjusted the camber arms you would be in stock specs.

 

[hobby-man]

You have even more camber in the rear than I did on sportlines without a camber kit.

 

[V3N0M_VZL4]

For that drop the the rear adjustable control arm is not needed.

 

[Romeoridgee]

Did they seat the suspension after putting it on a lift before the alignment? There is no factory adjustment for front camber and caster (maybe adjust front subframe for caster) and rear camber. Camber kits will have to be used.

Sponsored