BlinkerBeat
Senior Member
- First Name
- Josh
- Joined
- Oct 30, 2019
- Threads
- 3
- Messages
- 93
- Reaction score
- 133
- Location
- Central IL
- Vehicle(s)
- '19 CTR, F80 M3, '16 Colorado Diesel, '65 Lincoln Continental
- Thread starter
- #1
Here are a few photos of the C&R (PWR) street radiator. The core measured at 44.4mm. The street and track versions are the same thickness with the difference being fin height. The fin height on the street version is 8.1 mm resulting in 71 total water tubes. Fin height on the track version is 4.85 mm resulting in 105 tubes.
Install was straight forward. The biggest hassle was removing the front bumper and under tray. While I was in there I added the Acuity reverse flow hoses. The radiator also cleared the PRL intercooler pipes.
Install was straight forward. The biggest hassle was removing the front bumper and under tray. While I was in there I added the Acuity reverse flow hoses. The radiator also cleared the PRL intercooler pipes.