Blank Switches by Traction Control

[suhhh]

Dude this photo is seriously baller as fuck, almost looks straight out of a video game or like it could be on the cover of NFS lol

 

[ladysi]

Oof.. waaay too bright.. I'd tint/darken that switch light, if possible or may become a serious distraction while driving at night..

The adafruit led switches are way more timid than they look in photos. I have one for my radar detector mute switch (next to sport button) and it is very subtle:

Maybe there is a voltage difference between our 2 buttons?

 

[seselectronics]

The adafruit led switches are way more timid than they look in photos. I have one for my radar detector mute switch (next to sport button) and it is very subtle:

Maybe there is a voltage difference between our 2 buttons?

The switch I’m using came in 12 and 24v , I use 24v so the led is not that bright

 

[ladysi]

The switch I’m using came in 12 and 24v , I use 24v so the led is not that bright

Mine is a 3v-6v but I am using the 12v provided by the Uniden.... which has massive voltage drop to the button given the wire length and the super weak voltage from the R3.

 

[Ocelot]

Mine looks a bit different than yours too....
Strange that they have so many different versions of this....

I have CMBS and lanewatch like yours, my traction control/stability control is top center, I'm blank on the bottom and had a large blank on the right until I put an aux switch in that slot for driving lights. (I haven't installed the driving lights let

 

[Type_R-Noob]

Filled in the last empty blank with a TPMS.

Choice of PSI or BAR. You can set buzzer warning for low/high

Temperature is only in Celsius. You can set buzzer warning for a high temp.

Sensor that goes on each of the tires. They make another option where you put it inside the wheel like a direct TPMS but requires you to take the tire off the wheel.

Also bought this. Not sure if I am going to install this one just yet. The other blank is occupied by a on/off switch for my dash cam.

The dual USB port would go in the middle and I would relocate the on/off switch somewhere else. Not sure yet.

I ordered the RED but package wasn't marked. Tested to confirm color.

Do you happen to have a detailed version on how to install that tpms?

 

[9000RPM]

Do you happen to have a detailed version on how to install that tpms?

Not really. You need to unclip the plastic panel so you can knock out the blank switch cover and install the TPMS module.

Run the red (power) wire down to the fuse box, use a add-a-circuit and tap a switched fuse.

Attach the black (ground) wire to an eyelet connector and bolt it to a ground screw. There's one near the fuse box.

Remove the plastic caps, and screw on the TPMS caps.

 

[BBOS88]

Here some example of the buttons I use for my modules DRL/FOG lights + HIHG beams, and some examples what it does.

Cheers!

What size is the small red button on the far left? 12mm or 16mm?

 

[seselectronics]

What size is the small red button on the far left? 12mm or 16mm?

Is 12mm
Here I installed 16 mm for the module default R+ and VSA Fully off:

 

[DamonPS]

Is there a link to a walk through/guide/video on how to remove/replace/ install new buttons to that area? There's things I'd like to put there.

 

[gfields36]

Filled in the last empty blank with a TPMS.

Choice of PSI or BAR. You can set buzzer warning for low/high

Temperature is only in Celsius. You can set buzzer warning for a high temp.

Sensor that goes on each of the tires. They make another option where you put it inside the wheel like a direct TPMS but requires you to take the tire off the wheel.

Also bought this. Not sure if I am going to install this one just yet. The other blank is occupied by a on/off switch for my dash cam.

The dual USB port would go in the middle and I would relocate the on/off switch somewhere else. Not sure yet.

I ordered the RED but package wasn't marked. Tested to confirm color.

Kiiiiiinda Late but where did you fond that TPMS to fill in that blank? IDEK what to look for

 

[9000RPM]

Kiiiiiinda Late but where did you fond that TPMS to fill in that blank? IDEK what to look for

search for U912 TPMS Honda

 

[m1lkb0x]

Does anyone know what that part number is for new blank switches, having a hard time finding it

 

[DeVo]

Anyone put in something similar to Homelink in these spots? Would be nice to put in a garage door opener button

 

[BrandonB]

That is where I have my Ktuner mounted via a 3D printed bracket that snaps into one of the blank spots.

https://www.etsy.com/listing/1115710056/k-buddy-ktuner-v2-mount-for-10th-gen

Sponsored