CrippleRipple
Senior Member
- Joined
- May 11, 2018
- Threads
- 7
- Messages
- 530
- Reaction score
- 328
- Location
- Kansas
- Vehicle(s)
- 2018 Honda Civic Si (LSM)*SOLD* & 2018 Honda Accord Sport 2.0T (SNP)
This 100%. I followed the on screen successful unlock message in KTuner software to verify unlock & now have a non-functioning unit with no way to correct it on my end as my old car is long gone.There are too many conflicting messages to determine the unlocked status of the device.
1. You received a successful unlocking error message as shown above, but now you have to verify the color of the LED.
2. Do you have a blue LED flashing status? If not, now you need to go online and look up the LED color definitions. Your LED color definition says it could also be green. Does it matter if the device is connected to the OBD port? I checked the color while it was plugged in, and it was hard to tell if it was flashing green or blue; the colors are pretty similar.
http://www.ktuner.com/KTunerHelp/led_status_meanings.htm
3. Why would the error message tell you to check the Ktuner Unit Info when that's not the proper way to check it?
I'm at a loss for words at this point. I have a $450 paperweight because I followed directions, this all just feels so wrong. I wish I had the $200 to be done with it.
Sponsored