Eugene_Fk8
Senior Member
- Joined
- May 20, 2020
- Threads
- 10
- Messages
- 402
- Reaction score
- 206
- Location
- West Covina, CA 91790
- Vehicle(s)
- 2019 civic Type R FK8, 2018 RX350 base
without camber you probably rub a lot which you won't like.Hey guys, this weekend I’m planning on installing my set of 18x9.5 +45 wheels wrapped with Continental DWS06+ 275/35 along with K-Tuned springs. From what I’ve read here I’ll need to bend the front fender tabs, but could you guys help me out with a couple questions?
1. How is tread wear without camber arms after a mild drop (spoon, H&R, K-Tuned, etc.)? Do you find the inner edges wearing excessively fast without correcting back to the stock -1 camber spec?
2. If I do install camber arms to correct the negative camber, do you think I’ll need to modify the rear fenders to accommodate the wide tire?
Thanks in advance!
WIth camber then usually inside wear more than the outside and maybe you will be clear to not remove some tabs on the fender. Again, you will need camber kit for 275, its too wide to fit without camber.
Sponsored