Anyone have LCA for the SI?

incutebus

Senior Member
First Name
K
Joined
Feb 21, 2018
Threads
35
Messages
225
Reaction score
65
Location
SoCal
Vehicle(s)
FR-S, 21 Mk5 3.0 Supra, Lexus F-Sport
Country flag
Running an aggressive wheel and need some options for camber in the rear that works with ADS. Anyone know if SPC / Truhart works with them?

@360glitch
Sponsored

 

boibuddha

Senior Member
Joined
Apr 16, 2018
Threads
0
Messages
112
Reaction score
112
Location
Vancouver
Vehicle(s)
2018 Civic Si
Vehicle Showcase
1
Country flag
I think you mean rear Upper Control Arm.

I put in the SPC camber arms because these civics gain way too much camber from my subtle drop (1 inch).
Without the camber arms, the 1 inch drop = ~-1.6 degrees camber.
I made extended my arm about 1/2 inch longer than the OEM arm, that put my camber at ~-0.5 degrees.

There is plenty of adjustment on the SPC arms.
I do not see why the other camber arms would not work either.

If you plan on doing this yourself, I hope you have small hands; the driver side is more difficult due to the fuel tank lines.
You'll probably need an offset wrench as well.
I bought these myself, http://www.canadiantire.ca/en/pdp/maximum-offset-box-end-wrench-set-metric-7-pc-0588631p.html#srp

Figured I might as well get new tools since I'm saving money on labor anyways.

BTW, I have a 2018 Si myself.
 

360glitch

Moderator
Joined
Feb 15, 2017
Threads
108
Messages
4,710
Reaction score
4,873
Location
USA
Vehicle(s)
2019 Accord Sport 2.0T, 2017 Si Sedan (Sold), 2017 Sport Hatchback (Sold)
Vehicle Showcase
1
Country flag
The SPC arms are good to go. It's a tight fit like @boibuddha said. I didn't use an offset wrench but that may be helpful.
 

kstawowczyk

Member
First Name
Kyle
Joined
Jul 30, 2018
Threads
2
Messages
14
Reaction score
1
Location
Pittsburgh
Vehicle(s)
2018 Civic Si Coupe
Country flag
I picked up at set of Konig Ampliforms that have +35 offset. The stock wheels have +50, which makes these wheels stick out a tad further than stock. I'm low key freaking out now because I'm noticing negative camber that appears to be getting worse. And I'm afraid I'm ruining my suspension. I'm gonna grab the SPC arms for the rear, but should I get front as well? I have a 2018 Si.

@360glitch
 
Last edited:

L8apex

Senior Member
Joined
Oct 18, 2017
Threads
24
Messages
584
Reaction score
394
Location
Southern Cali
Vehicle(s)
2018 SGP Sport
Country flag
Last edited:


 


Top