Amp with DSP

capbob

New Member
Joined
May 25, 2018
Threads
0
Messages
2
Reaction score
1
Location
ohio
Vehicle(s)
civic si 10 gen
Country flag
I'm having a tricky time figuring out how to wire my DSP remote turn on lead wire. I'm installing JL Fix 82 and Twk D8 and then XD700/5 amp.
I would wire the remote turn on wire to the front lower console passenger side power outlet's positive wire but then I'd loose that outlet's use value and I use it regular.

Has anyone wired their remote turn on wire into the fuse box to an open fuse?
Or included a relay somewhere and power straight from battery?

Not sure how best to wire this up so any suggestions would be greatly appreciated.
Did you figure out the turn on wire? You can have the Fix 82 turn on auto sense on factory stereo. Then use the Fix82 turn on OUTPUT to the TwkD8 and amp. Works great.
Sponsored

 

M1KL83

Senior Member
First Name
Michael
Joined
Mar 31, 2018
Threads
10
Messages
150
Reaction score
33
Location
Ontario, Canada
Vehicle(s)
2018 Civic Hatchback LX 6MT, 2002 Honda Accord SE 5MT
Country flag
Did you figure out the turn on wire? You can have the Fix 82 turn on auto sense on factory stereo. Then use the Fix82 turn on OUTPUT to the TwkD8 and amp. Works great.

I haven't yet actually. Did you Positap the stereo lead?
I'm thinking about using a fuse adapter and run the remote wire straight to the fuse box and use a fuse that turns on either the car and or when the key is in ACC mode.

Could you further explain the steps you've done in using the Auto Sense for the Fix 82?
 


 


Top