BAUERRX
Member
- First Name
- Eric
- Joined
- Apr 13, 2020
- Threads
- 3
- Messages
- 9
- Reaction score
- 0
- Location
- Fort Worth
- Vehicle(s)
- 2019 Civic Type R, 2006 MX-5 Cup Car, 2015 Tundra
- Thread starter
- #1
I have a '19 CTR coming from a dealer in Florida next week. I know I need aftermarket wheels for so I don't break the 30 series 20 inchers.
Anticipate keeping for a year or two until I get a new C8.
18 x 9.5 seems be the most popular size on the forum.
Seems like my 2 paths are to get a set of forged wheels then sell them before I sell my car (and put the stock wheels back on) or get a set of cheaper flow formed wheels to save money up front knowing they would be harder to sell at the end.
After researching so far I am between a Titan 7 T-S5 (about $2K for the set) or Konig Apliform (about $850 for the set).
Car will primarily be a daily driver but also will be tracked occasionally.
New to the forum so any advice would be appreciated.
I am in Fort Worth in case anyone has a set up they are looking to trade out of and you are in the area.
Thanks in advance for any feedback!
Anticipate keeping for a year or two until I get a new C8.
18 x 9.5 seems be the most popular size on the forum.
Seems like my 2 paths are to get a set of forged wheels then sell them before I sell my car (and put the stock wheels back on) or get a set of cheaper flow formed wheels to save money up front knowing they would be harder to sell at the end.
After researching so far I am between a Titan 7 T-S5 (about $2K for the set) or Konig Apliform (about $850 for the set).
Car will primarily be a daily driver but also will be tracked occasionally.
New to the forum so any advice would be appreciated.
I am in Fort Worth in case anyone has a set up they are looking to trade out of and you are in the area.
Thanks in advance for any feedback!
Sponsored