Needs a tuner like DRob lol he'll get you 330-340whp and around that amount of torque if not a little less with Flex fuel tune on W1 turbo and FBO. It's safe too.
I paid $450 for labor and took my own trans fluid because I didn’t wanna use oem fluid
Is your clutch engagement low?
It’s a bit lower then OEM but no so different
Can you send me a pic of your clutch pedal/rod? I know for most aftermarket clutches it needed adjusting.
Will the type r clutch bolt right up to the Si’s?
How much did it cost to have installed?I recently got the first action clutch stage 3 with the light weight flywheel installed by DTtuned in Ontario, ca.
the stock clutch kept slipping with the bolt ons but so far ive done a few pulls and it is a huge difference, I was debating with clutch master fx400 and the stage 3 action but I’ve heard bad things about clutch master especially with there clutch having chatter. So far I’m 540miles I’m with action and I have no chatter in 1st or 2nd gear but a mild chatter in reverse.
I’ll post up some videos of pulls and diggers later on to keep you guys posted on the stage 3.
No a regular type r clutch will not. The one that was linked is a retro fit created to bolt up to the si and other 10th gens. So the one in that naperformance link will bolt right up, it is made by eman/k20z3/naperformance. I have heard nothing but great things about his retro type r clutch
I paid $450 and took him the trans fluid because I didn’t want oem
Smart here in Sc they think folks are billionaires they quoted me a stack. I said never thee mind I’ll either do it myself or go into Ga and have them do it there
Hey would you be able to send me a link where you found the clutch and flywheel, also was it a combo or did you buy them separatelyI recently got the first action clutch stage 3 with the light weight flywheel installed by DTtuned in Ontario, ca.
the stock clutch kept slipping with the bolt ons but so far ive done a few pulls and it is a huge difference, I was debating with clutch master fx400 and the stage 3 action but I’ve heard bad things about clutch master especially with there clutch having chatter. So far I’m 540miles I’m with action and I have no chatter in 1st or 2nd gear but a mild chatter in reverse.
I’ll post up some videos of pulls and diggers later on to keep you guys posted on the stage 3.
I have this clutch and flywheel combo you can go on their site and put the car in and it show up and you do have to buy them separately.
Ok thanks.
