3 or 6psi boost for flashpro?

Joined
Mar 9, 2017
Threads
2
Messages
8
Reaction score
1
Location
CA
Vehicle(s)
2016 Civic EXT
Looking for some opinions on whether I should go with a modest 3psi or 6psi boost with the basemaps.

Cheers.
Sponsored

 

360glitch

Moderator
Joined
Feb 15, 2017
Threads
108
Messages
4,710
Reaction score
4,873
Location
USA
Vehicle(s)
2019 Accord Sport 2.0T, 2017 Si Sedan (Sold), 2017 Sport Hatchback (Sold)
Vehicle Showcase
1
Country flag
If you are running decent fuel most would probably say that the 6psi base map is still conservative.
 

teebee288

Senior Member
Joined
Jan 26, 2017
Threads
3
Messages
193
Reaction score
167
Location
Quebec
Vehicle(s)
Civic 2017 hatchback sport, Mazda CX-3 2017, polaris rzr 1000s 2017
Country flag
When i dynoed mine there was about 15whp and approx. 15-17wtq difference between +3 and +6 psi on basemap, i always run with +6.
 


OP
OP
Joined
Mar 9, 2017
Threads
2
Messages
8
Reaction score
1
Location
CA
Vehicle(s)
2016 Civic EXT
Any concerns with the stock bpv handling the extra boost or other potential wearing?
 

teebee288

Senior Member
Joined
Jan 26, 2017
Threads
3
Messages
193
Reaction score
167
Location
Quebec
Vehicle(s)
Civic 2017 hatchback sport, Mazda CX-3 2017, polaris rzr 1000s 2017
Country flag
Any concerns with the stock bpv handling the extra boost or other potential wearing?

A lot of guys here on the forum run flashpro with stock bpv and no complain at all...for now. time will tell. If bvp start leak upgrade with boomba bov, or back to stock go to dealer to fix it and reflashed after.
 

45Lexroc

Senior Member
Joined
Sep 6, 2016
Threads
19
Messages
447
Reaction score
428
Location
562 Los Angeles
Vehicle(s)
'16 Civic Coupe Touring.' 06 Lexus Is250.
Vehicle Showcase
1
Country flag
No Brainer, +6psi! Why would you spend $700 only to run +3. Out the box I was running +6 then switch to +6psi with Sri setting with AFE Takeda. Car is running reliably with 91 octane.
Sponsored

 


 


Top