Jpierro79
Senior Member
- First Name
- John
- Joined
- Mar 6, 2019
- Threads
- 33
- Messages
- 398
- Reaction score
- 273
- Location
- Myrtle beach South Carolina
- Vehicle(s)
- 2018 type R 2015 c300
- Thread starter
- #1
I’ve been looking at the turbo kits produced by full race and ultimate racing.
both their websites listed that the 3.5” MAF scaling is available. It says exactly “hondata MAF scaling available”
There are full race maps but they are almost identical to hondata base map.
now the MAF scaling is different and the aircharge numbers are slightly lower but other than that they are identical to hondata map. Can anyone confirm that this is the scaling.
Im checking cause the 3.5” MAF is 40 percent larger yet the scaling only adds about 15 percent. Now I know it’s not exact science but a 3. 5 inch pipe flows double what a 2.5 does..
Can anyone confirm this scaling.
both their websites listed that the 3.5” MAF scaling is available. It says exactly “hondata MAF scaling available”
There are full race maps but they are almost identical to hondata base map.
now the MAF scaling is different and the aircharge numbers are slightly lower but other than that they are identical to hondata map. Can anyone confirm that this is the scaling.
Im checking cause the 3.5” MAF is 40 percent larger yet the scaling only adds about 15 percent. Now I know it’s not exact science but a 3. 5 inch pipe flows double what a 2.5 does..
Can anyone confirm this scaling.
Sponsored
Last edited: