27WON more engine dress up pieces?

[Vincent@27WON]

Simple question here fam, should we as a company invest in more engine bay and dress-up pieces? LIke more shrouds, or lips, spoilers, etc?

Sponsored

 

[86salmon]

Yes please!

A new dipstick would be amazing

Also, valve cover, and orange tip

 

[Spunkmire]

If you happen to make a functional rear wing for the Si Sedan I would buy 2.

 

[rtypefk8]

Yes, do you folks have engine bay shrouds/cowling around the sides?
Preferably non-carbon fiber

 

[RepublikaSrpska]

Simple question here fam, should we as a company invest in more engine bay and dress-up pieces? LIke more shrouds, or lips, spoilers, etc?

Maybe a skid plate for the underbody!

 

[BrandonB]

Maybe a skid plate for the underbody!

One to replace the thin Honda one!

 

[casper]

I am a fan of dress-up pieces that also solve an inconvenience from the OEM part. For example, Acuity makes an oil cap that can be removed with a socket wrench. Or as @86salmon suggested, an oil dipstick - the OEM one is pretty hard to read, so maybe improve upon that. If the skid plate had an oil change door that required like 1-3 bolts or convenient no-tools-needed fasteners, I’d probably get that lol. Just make sure the door is big enough so that oil wouldn’t end up on the top side of the plate.

Of course, any of these parts should not introduce a drawback relative to the OEM piece and there needs to be the possibility of everything matching color-wise

Just my thoughts. I suspect that you could also sell these parts in a single color “bundle” for a value price since people will want to save on shipping as much as possible.

 

[RepublikaSrpska]

I am a fan of dress-up pieces that also solve an inconvenience from the OEM part. For example, Acuity makes an oil cap that can be removed with a socket wrench. Or as @86salmon suggested, an oil dipstick - the OEM one is pretty hard to read, so maybe improve upon that. If the skid plate had an oil change door that required like 1-3 bolts or convenient no-tools-needed fasteners, I’d probably get that lol. Just make sure the door is big enough so that oil wouldn’t end up on the top side of the plate.

Of course, any of these parts should not introduce a drawback relative to the OEM piece and there needs to be the possibility of everything matching color-wise

Just my thoughts. I suspect that you could also sell these parts in a single color “bundle” for a value price since people will want to save on shipping as much as possible.

I AGREE with making the oil/oil filter door bigger so when the oil stream starts shooting out it doesnt make a mess.

I bought some cheap chinese-made crap on ebay and I had a huge oil mess because the oil over-shot the little door and was gushing from every corner of the skid plate, couldnt do anything but sit and watch until the oil stream got smaller...

 

[Chilly613]

Yes, do you folks have engine bay shrouds/cowling around the sides?
Preferably non-carbon fiber

You mean these?

2016-2021 HONDA CIVIC ENGINE BAY SHROUDS

 

[borcth]

It would be cool if you guys made a full front, side and rear lip kit. 27won quality. If at least a nice front lip. a good solid front lip with awesome fitment and a solid installation kit. I like my bayson R, and it's nice but I'm open for future changes. Lug nuts maybe. Good high quality ones that don't rust! A valve cover too. Either in wrinkle paint or regular gloss.

Engine dress up kit. Replacing all the caps, battery tie down, oil dipstick with a 27won matching kit.

 

[Vincent@27WON]

Yes, do you folks have engine bay shrouds/cowling around the sides?
Preferably non-carbon fiber

We don't have shrouds for the FK8 yet.

 

[Vincent@27WON]

I definitely want to explore the skid plate. I hate the OEM one lol.

 

[B$$]

We don't have shrouds for the FK8 yet.

FK8 shrouds get my vote.

 

[EarthPIG_0311]

Yes please! I agree with pretty much everything mentioned above and would want to see all those ideas come to fruition but I'm especially feeling:

• Orange TIP as mentioned by @86salmon
• Skid plate as mentioned by @RepublikaSrpska
• With oil door as mentioned by @casper
• Front, side and back lip kit as mentioned by @borcth

"If you build it, they will come"

 

[Jason Baker]

Vincent
I was just able to hit 88 mph in my civic. Can you please look into a new flux capacitor option for the tenth generation? Mine seems to be shorting out. I’m still stuck in 2023.
I know youll see it my way.

Sponsored