2020 Type R bolt pattern question

[SlowSicilian]

I’m looking at the following wheels 18×8.5:

1. VMR V710 +45 mm

2. Motegi Racing MR 147 CM 7 +35 mm

3. Flow One F2 +40 mm

I find 2 bolt patterns. 5×120 5 x 4.72 and 5×20 65 mm (5 x 4.72). I am assuming for my 2020 Type R?

Thanks so much,

Jim

Sponsored

 

[StevenMatchett]

5x120

 

[SlowSicilian]

Thank you for the reply. Here is the question I need answered as I know the bowl pattern is 5×120.

I find 2 bolt patterns. 5×120 5 x 4.72 and 5×20 65 mm (5 x 4.72). I am assuming for my 2020 Type R?

Stay safe,

Jim

 

[Mogadee]

Thank you for the reply. Here is the question I need answered as I know the bowl pattern is 5×120.

I find 2 bolt patterns. 5×120 5 x 4.72 and 5×20 65 mm (5 x 4.72). I am assuming for my 2020 Type R?

Stay safe,

Jim

But you don't have a question there, or if you do, we don't know what you are trying to ask.

 

[SlowSicilian]

I will write this into questions.

First, is 5×120 (X5 .72) the proper bolt pattern for my 2020 Type R?

Or, is the 5×120 65 mm (5×4.75)?

I think it is the first one because I couldn't find any in the 2nd one.

I just wanted the input from those who know more than me.

Thanks so much,

Jim

 

[Mogadee]

I will write this into questions.

First, is 5×120 (X5 .72) the proper bolt pattern for my 2020 Type R?

Or, is the 5×120 65 mm (5×4.75)?

I think it is the first one because I couldn't find any in the 2nd one.

I just wanted the input from those who know more than me.

Thanks so much,

Jim

The bolt pattern is 5x120.

Where are you seeing the 5x4.75 and x5.72?

 

[jayy_swish]

It’s essentially all the same thing 5x120 is 120mm, 5x4.75 is 4.75inches. 120mm in inch’s is 4.72in. But go by using 5x120

 

[SlowSicilian]

I found the 2 bolt patterns when I plugged in 18×8.5 in the Fitment Industries site. Both were listed in the bolt pattern menu. I tried to take a screenshot but for some reason when I take it, it reverts to the wheel locator without any information contained in it.

I ended up ordering the VMR V 701 from Fitment Industry/Custom Offsets after learning a few days after ordering the VMR V7 10 wheels they wouldn't be available until, at the earliest, the end of January, 2021. These wheels had the +45 mm offset. I purchased Continental Viking Contact 7 snow tires.

I will review the forum's recommendation for summer tires this spring.

Best holiday wishes,

Jim

 

[Romeoridgee]

65 is the bore size of the center hole.

 

[SlowSicilian]

As inspector Clouseau often said, "problem soll–ved."

Thank you,

Jim

Sponsored