cscook
New Member
- First Name
- Chris
- Joined
- Apr 21, 2018
- Threads
- 1
- Messages
- 2
- Reaction score
- 0
- Location
- Atlanta
- Vehicle(s)
- 2017 Civic LX 6MT
- Thread starter
- #1
So I recently upgraded the head unit in my 2017 Civic LX Hatchback 6MT to the Sony XAV-AX100, with the XSVI-1731-NAV data interface, and the ASWC-1 steering wheel control interface.
After reading some threads here I was able to get the illumination and rear view camera all working properly, however I am not having as much luck with the ASWC-1.
I let the ASWC-1 do the auto-configuration (after updating to the latest firmware), and basically none of the buttons worked. Based on the LED flashes it recognizes that the correct wires are connected, and that the headunit is Sony.
I then tried to do custom steering wheel controls programming through the headunit, but could only get at most 3 or 4 buttons programmed out of the 8.
Last, I attempted to manual program the ASWC-1, and had some success with that. All of the buttons work except for the "on hook" and "off hook" phone buttons. However I can press the "push to talk" button to answer a call or to end a call. So now I have all of the functionality of the steering wheel controls, however two of the buttons aren't technically working.
I can live with the setup as it is now, but I would prefer for all the buttons to do their intended task if possible, so I figured I would check here to see if anyone had a similar issue or any guidance.
Am I missing something or is there something else worth trying to get the "on hook" and "off hook" buttons working?
Thanks in advance for any suggestions.
After reading some threads here I was able to get the illumination and rear view camera all working properly, however I am not having as much luck with the ASWC-1.
I let the ASWC-1 do the auto-configuration (after updating to the latest firmware), and basically none of the buttons worked. Based on the LED flashes it recognizes that the correct wires are connected, and that the headunit is Sony.
I then tried to do custom steering wheel controls programming through the headunit, but could only get at most 3 or 4 buttons programmed out of the 8.
Last, I attempted to manual program the ASWC-1, and had some success with that. All of the buttons work except for the "on hook" and "off hook" phone buttons. However I can press the "push to talk" button to answer a call or to end a call. So now I have all of the functionality of the steering wheel controls, however two of the buttons aren't technically working.
I can live with the setup as it is now, but I would prefer for all the buttons to do their intended task if possible, so I figured I would check here to see if anyone had a similar issue or any guidance.
Am I missing something or is there something else worth trying to get the "on hook" and "off hook" buttons working?
Thanks in advance for any suggestions.
Sponsored