RSR Wheels
Senior Member
- First Name
- Cesar
- Joined
- Jan 23, 2018
- Threads
- 13
- Messages
- 116
- Reaction score
- 79
- Location
- City of Industry
- Vehicle(s)
- 2019 S550 Mustang / 2019 Chevy Silverado 1500
- Vehicle Showcase
- 1
- Thread starter
- #1
Hey all!
If you have yet to see our sticky thread in the W+T subforum, we make a Honda Civic Type R wheel specific to the car. Check out the thread HERE. On the other hand, we also make wheels for the S197 and S550 Mustangs and C6 and C7 Corvettes. Recently we did some self reflecting and realized we needed to share something with you all, but especially those looking for something a little more aggressive.
FACT: our 19x10" et37 - et41 R902, built for the C6 and C7 vette, fits the CIVIC TYPE R!!!!
The PCD for our R902 is the exact same as our R903. Now this wheel will be a bit more aggressive than most wheels out there, so it isn't for everyone. It clears the brakes and is available in our standard Brushed Titanium finish.
I did some searching for you on the forum and found a user rocking 19x10 et42 wrapped in 255/35/19 with no rubbing or cut fenders. He is also lowered on GC and his thread can be found here.
Also, Fitment Industries highlighted the R902 and R903 in a recent video. Check it out:
For those interested in the 19s, please contact us for special pricing.
Email: [email protected]
Phone: 714-323-3741
If you have yet to see our sticky thread in the W+T subforum, we make a Honda Civic Type R wheel specific to the car. Check out the thread HERE. On the other hand, we also make wheels for the S197 and S550 Mustangs and C6 and C7 Corvettes. Recently we did some self reflecting and realized we needed to share something with you all, but especially those looking for something a little more aggressive.
FACT: our 19x10" et37 - et41 R902, built for the C6 and C7 vette, fits the CIVIC TYPE R!!!!
The PCD for our R902 is the exact same as our R903. Now this wheel will be a bit more aggressive than most wheels out there, so it isn't for everyone. It clears the brakes and is available in our standard Brushed Titanium finish.
I did some searching for you on the forum and found a user rocking 19x10 et42 wrapped in 255/35/19 with no rubbing or cut fenders. He is also lowered on GC and his thread can be found here.
Also, Fitment Industries highlighted the R902 and R903 in a recent video. Check it out:
For those interested in the 19s, please contact us for special pricing.
Email: [email protected]
Phone: 714-323-3741
Last edited: