'17 Si/Touring speaker specs

[Rikdrt1]

On these Civics with the 12Speaker setup, anyone figure out or measure or know the ohms/impeadance or sensetivity rating on them?

Everyone says if u change them make sure the numbers are higher....higher than what?

Sponsored

 

[cestjoel]

On these Civics with the 12Speaker setup, anyone figure out or measure or know the ohms/impeadance or sensetivity rating on them?

Everyone says if u change them make sure the numbers are higher....higher than what?

Probably higher sensitivity and lower Ohm, since the stock amp will probably under power any good after market speaker.

 

[calonzo]

On these Civics with the 12Speaker setup, anyone figure out or measure or know the ohms/impeadance or sensetivity rating on them?

Everyone says if u change them make sure the numbers are higher....higher than what?

http://www.wikihow.com/Measure-Speaker-Impedance

 

[Doc_C]

Careful going lower impedance. If the factory speakers are 4 ohm and you present a 2 ohm load on the amp, you're going to create a scenario where the factory amp is going to produce much more heat with the possibility of it shutting down from thermals, or it's protection circuitry from the lower load presented by the speakers.

 

[josby]

On these Civics with the 12Speaker setup, anyone figure out or measure or know the ohms/impeadance or sensetivity rating on them?

The mids are 4 ohm, the tweeters are 3.2 ohm, and the center and subwoofer are 2 ohm. Not sure about speakers 11 and 12 (the ones up high in the back) since I didn't grab the manual page for those since my sedan doesn't have them.