10th Gen Honda Badges

[plus]

hello friends,

recently just picked up a 2020 Si sedan! Wanted to swap out my Honda badges for “type r” red Honda badges...
I’ve seen a good amount of them online and I don’t see any listed exactly for sedans (mainly coupes/hatches)

Q) Are the previous 17-19 Honda badges the same with the 20’ sedans?

***I know that the 20’ front & rear end received a refresh and I believe they’re larger

Sponsored

 

[zspeed]

The front red H emblem is smaller in the 2020 FK8 compared to the ‘17-‘19 due to a larger opening on the front grille. The rear is still the same.

You can use the ones that came from the ‘17-‘19 for the front, not sure about the rear for your Si sedan though.

 

[FrankTheTank21]

I recently made a post about this just recently did my 2020 civic sedan

Very simple and easy install as well you can order the emblems from Honda themselves! I paid around 90 bucks altogether for both

 

[plus]

I recently made a post about this just recently did my 2020 civic sedan

Very simple and easy install as well you can order the emblems from Honda themselves! I paid around 90 bucks altogether for both

Oh that’s sick! Can’t go wrong with genuine Honda parts. I’ll probably order a set tonight.

 

[Jens_sedanEX18]

I want some new Honda badges myself, without doing a vinyl wrap or what not. Are they easy to change out?

I liked to get ones that are all blacked out. But after watching someone take off the front emblem on their car and having to break it, I’m just like ???

 

[FrankTheTank21]

I want some new Honda badges myself, without doing a vinyl wrap or what not. Are they easy to change out?

I liked to get ones that are all blacked out. But after watching someone take off the front emblem on their car and having to break it, I’m just like ???

Yeah if you can get it off without breaking it you’re a champ lol broke a pin on both of mine, but it doesn’t matter tbh cause if you get genuine ones they’re plug and play right In with a two pin set up as well, as long as you do it smart you won’t chip paint or anything either. I forced mine out by going all along the edges with a screwdriver wrapped around a microfiber towel then forced it out after going around the edges a few times

 

[Jens_sedanEX18]

Yeah if you can get it off without breaking it you’re a champ lol broke a pin on both of mine, but it doesn’t matter tbh cause if you get genuine ones they’re plug and play right In with a two pin set up as well, as long as you do it smart you won’t chip paint or anything either. I forced mine out by going all along the edges with a screwdriver wrapped around a microfiber towel then forced it out after going around the edges a few times

I guess they made it where they don’t want you to take them off but grrr you just want to modify everything on your car lol ?

 

[FrankTheTank21]

I guess they made it where they don’t want you to take them off but grrr you just want to modify everything on your car lol ?

You just break the Honda badge off nothing else lol... you can remove the whole bumper for a more clean way of taking it apart but who has time for all that???

 

[justasimpleman]

I want some new Honda badges myself, without doing a vinyl wrap or what not. Are they easy to change out?

I liked to get ones that are all blacked out. But after watching someone take off the front emblem on their car and having to break it, I’m just like ???

Here’s the OEM set for the sedan.

https://www.collegehillshonda.com/product/08F20-TBA-100.html

Price seems reasonable... I paid double for the hatch set. I’m not even sure what the difference is, but I didn’t want to get the one for the sedan, and it not fit my hatch. Now I need to figure out what ad

Sponsored