type-r

Although its been out for a while now, it came to our attention we never formally updated everyone here on the release! Following the great feedback on our Civic SI catback we looked to recreate the experience on our Fk8 exhaust. We knew the option for a v-band connection and "race" and...

We are excited to bring the FK8 community our new MAPerformance Oil Cooler Kit! One of the biggest complaints, and an issue we ourselves ran into, with the FK8 are the oil temps on track. While pushing the car to its limits it became abundantly clear that an oil cooler was needed to stay out on...

Selling because I no-longer own a civic :(. Great cover, custom made to fit the type R by CoverCraft, repels water but is also breathable, not completely water tight though, heavy rain will get through. Slightly cushioned to provide a bit of protection from bumps. Kept my car's paint perfect...

Selling my stock exhaust off of a 2019 Type-R. Located in Austin, TX $150.00

Hey, all. I have an upcoming wrap that's nearing completion. It's soon to be featured on the Wrapmate website, and there are a few photos of it under construction that are making the rounds on social media, so thought I would share here as well. Enjoy!

Bought two by accident. $50 shipped in the US

As many of you have seen, we began testing a potential drop-in turbocharger upgrade for the FK8 Honda Civic Type-R in July of 2019. We managed to produce 460+ horsepower and 430+ ft/lbs torque on stock engine and produced close to 500 horsepower with third party testing with our first prototype...

BLOG POST As some of you may have seen, we have been testing our prototype drop-in turbocharger upgrade for the FK8 Civic Type-R platform over the past couple of weeks. What we haven’t shown, though, is the fact that we’ve spent countless hours over these weeks learning about the Bosch ECU, how...

The PRL Motorsports Turbocharger Inlet Crossover Pipe Kit is a direct bolt-on upgrade that eliminates airflow restriction before the turbocharger, allowing the turbocharger to operate more efficiently. Our design utilizes a cast aluminum inlet piece to allow smooth transition from the...

Good afternoon all, Purchased a '19 Type-R two Fridays ago and loving every minute of it. After driving conservatively for the first 600mi (700mi now), I finally let her loose and experienced some of the greatest driving pleasure of any car I've ever sat in. The pulls in this car were almost...

RSR FORGED WHEELS BROUGHT TO YOU BY - LESS TALK MORE WHEELS MORE ABOUT RSR RACE SERIES LINE. RACE SERIES WHEELS RSR forged wheels are produced by applying eight thousand times heavier pressure than casting. This process prevents porosity inside the material and creates homogenous metal...

Not the best way to spend first few hundred miles in first week with car but I am currently waiting on Honda Roadside Assistance to come tow my CTR which has a nail puncture. Is there any new road hazard warranty for these Continentals - or am I just screwed? Should I attempt the temporary...

Boomba Racing is proud to announce our fully recirculating BPV for the Type-R/Accord 2.0 ! This is a high quality aftermarket solution for the factory BPV. It is precision machined from aircraft grade billet aluminum, which is far superior to the factory piece. It features our tried and true...

Looking for your opinion if I should install a Type-R Spoiler on a Honda Civic X Hatchback (LX model - lowest grading of 5 door hatchback in Canada). One complication is that my car is on lease from Honda. If I install, I will either need to buy back the car at the end of the lease or pay some...

https://www.kseriesparts.com/HD-FP-FK8-US.html HONDATA 17-18 CIVIC TYPE R FLASHPRO PART NUMBER: FP-FK8-US $690.00 & FREE SHIPPING Starting at $61/month with Affirm. Learn More Increase your horspower, torque, boost, rev limit, lower your VTEC and more with the FK8 Civic Type R FlashPro...

Selling OEM Wheels In Excellent condition 1500 for all 4 pr 400 each 2584 miles on the dot with these wheels Locals get dibs first. proof of mileage has 2500 miles on them.

For more information please contact us via email:[email protected] We set out to perform extended testing and verify tune results with the help of one of our dealers on the east coast, Derek at Innovative-Motorworks. One of his customers was one of the first to schedule ECU unlocking with us...

So we did a thing... :stirthepot: The vehicle is currently up and running as of today! We will be releasing more information shortly as we we being testing on and off the dyno. We have quite a few other tricks up our sleeves within the near future as well, stay tuned. :thumbsup:

Hello Fellow CivicX Enthusiasts! It brings me great pleasure to announce our release of KTuner for the 17+ Civic Type-R!!!! For those of you looking for a little more in depth information on our journey and where we're headed, check out the KTuner and the Type-R – Where do we go from here...

Looking for any other CTR owners in Pennsylvania. Anybody interested in a meet? I wasn't expecting to get mine until November, but it arrived last week.