torque

I'm wondering if I should change my CVT fluid with the OEM Honda HCF-2 fluid or if I should use some of the fluid that is advertised for better longevity and performance with higher torque CVT's. I currently have a 2021 Civic EX making around 250 torque which apparently is the edge of safe...

Hello friends, I recently got ahold of a type R, and this discussion of torque steer has been on my mind. It's been said that deviating from OEM wheel and tire size will facilitate torque steer since Honda Engineers designed the set up to eliminate/almost eliminate torque steer. I see everyone...

Selling a hondata flashpro for 500$. Here is the link to the models it fits. https://www.hondata.com/flashpro/flashpro-2017-civic-si Got this from a buddy who got rid of his honda for an STI. He parted out his car and I bought this from him. I was going to install on my wive's car but never...

I'm trying to determine where I'm at HP and TQ wise and don't really have the time or money for a dyno test. Looking for somebody with a similar set up or experience with a similar set up that could give me a rough estimate on where I'm at. I usually run 91 octane but will occasionally mix 2-3...

Hi, I’m thinking of changing my wheel size from the standard 20” x 8.5” ET60 to 19” x 9” ET43. Will this give me any torque steer or should it be okay? I know people are running 18” x 9.5” but personally the 18s are too small for me. Thanks, Brandon

Hey guys, I have a 2017 si that makes a thumping noise at lower speeds and turns to more of a whirring noise at highway speeds. I jacked up the car and dont have any play on the wheels and they spin fine - it only seems to act up under load. I am suspecting it may be a wheel bearing. Since I am...

I'm trying to get RaceChrono & Torque Pro set up for my next HPDE & I can't figure out how to record the Brake input. In addition, no active PID's come up with Torque Scan. I thought I read a post several months ago where someone figured it out but I can't find it. Does anyone have the...

Moved. Please delete.

So I've read a lot about the new 10th gen Si clutch not being so great and i just wanted a bit of clarification from my own experiences. I've tested driving at like 3-4k rpms in first gear and I have stomped on the gas and the result is me having wheel slippage at around 20mph. Now this is where...

Hey, everyone. I am doing a Raspberry Pi Instrument Cluster project and was wonder information was available through OBD. Here is a dump of the the ECU says is available. This dump was generated off of a 2017 Civic Sedan EX-T. I plan compare these values to what my own Hatchback Sport Touring...

so im having second thoughts on the clutch i just bought. my plans are below. i bought the fx250 clutch as i want to go the lowest stage i can get away with because i daily the car and dont want it to become a chore. at the same time i dont want to end up having to get another clutch because...

Thanks to the help I received I am running OBD2AA to display Torque PIDs on the head unit. Without adding every PID under the sun and going through trial and error, does anyone know which PIDs are actually available for our cars, specifically Type R in my case? So far I know I cannot read...

So I installed torque on my 2017 civic hatch and I am trying to connect my bluetooth ob2 reader to the console but it is not showing up on the list of bluetooth devices i can connect to. Does anyone know how i can pair the obd2 reader to the console with the bluetooth on my civic?

A mount unlike any other. https://www.27won.com/blog/honda-civicx-rear-motor-mount-design-blog-part-1

These cars are making a lot of horsepower through our stock exhausts. Why? It goes against everything I have been reading, especially on a turbocharged car, up to this point. I can see now that it is accepted here since PRL's dyno test but why isn't it a restriction? 2" ?wtf? :dunno...

Any Torque Pro users in here? I know there are a lot of parameters you can monitor with OBD2. I usually do a LOT of 1/4 mile runs while recording them and looking at the data to take notes and make changes where I can. I've have been using this for years but for some reason, certain sensors...

Why is it that most of the dyno's that are posted show peak horsepower in the range of 5200-5800rpm but in stock form, peak horsepower is at 6000rpm? I understand the addition of aftermarket cams can move the powerband around. Otherwise, this just seems weird to me.

Hey guys, Brand new here. Sorry if there is already something on this or it is common sense among owners. I have read all through my owners manual and even done some decent online research to figure out what the recommended lug nut torque rating is for the CTR. I could not find anything...

Does anyone have any idea on how to reset the steering torque sensor on the 16 Civic? Trying to rule out any actual mechanical problems with my car as the steering pressure feels uneven between turning left and turning right.

Hey everyone! I don't know if this was posted anywhere yet and I was not able to find it in the manual that came with my civic. But would anyone happen to know what the lug nut torque would be for this? I have the Canadian EX-T. Would it be the standard 80 ft/lbs as previous civics? Any...