I have a 2018 Civic Si and recently (finally) replaced the OEM rims/wheels with 255/40R18 Michelin Pilot tires on an 18x8.5 35offset rim. The result looks great! (Attached photo.) However, now I'm noticing fender rubbing when I hit bumps at speed. It's unsettling. I thought there was plenty...
I've been trying to find a suitable swift spring rate and length to put on my front struts for my bc coils. I currently have the default 6k fronts, and that's too soft for me. i'm currently on a 18x9.5 +33 265/35. i'm trying to go lower, maybe about a half inch more but I start smacking my...
Im looking at getting Regamasters for my Si Coupe but figured i would post around to see if anyone might see any issues that i am overlooking. The research ive done shows that they will fit no problem but just in case.
The wheels im looking at are 18x8.5 +38.
I dont think these will poke quite...
Have been steadily upgrading my 2020 Sport Touring over the last 6 months and have accumulated a bunch of OEM parts I no longer need, but maybe someone else can find use for them.
All parts have been on the car for roughly 8000 miles with little to no damage aside from normal wear.
$250 - OEM...
Curious to see if anyone has done this or knows someone who's done this. I'm running some super grippy 255/35 Nittos on my stock rims (I like the look) and I still think theres plenty of room for lowering springs to compensate for the increase in ride height.
Thoughts?
I have a TEIN street basis z coilover but I'm not liking how rough the ride is when it comes to bumps everyone in the car starts bouncing it gets annoying. I know coilovers are supposed to be like that , however my stock suspension took in bumps way better than these did. The shop suggested to...
bought the oem pop-up moonroof wind deflector from Honda. I'm trying to figure out where the springs go. Does anyone know how, or can take a picture of theirs to reference off of ?
So Iām looking into getting a little lower but keeping a low budget. Buying eibach sportline lowering springs and SPC rear control arms to compensate for negative camber.
Iām on stock 2020 hatch sport wheels currently (not sure if thereās a difference between sedan/coupe) and looking to keep...
Hey everyone I just ordered the Eibach pro springs for my Si and Iāve been seeing a lot of comments on the forums that contradict themselves and I was just wondering if a camber kit is needed to stay close to oem specs. Iāve been seeing people say yes and no so I am quite confused on what to do...
Hey everyone. I still have this set of Eibach Sportlines lowering springs for sale and would like to get rid of them ASAP. Looking for $150! Pm me if you are interested!
Hey guys,
So 6 months ago, I installed the Eibach Pro-Kit lowering springs on my 2018 Si coupe (below). The drop was even and nice, and since then I haven't had much issues (apart from a weird squeaking noise from the front left - different issue though).
However, today I noticed my rear...
Hello! Iām selling my air suspension. Everything you need to be on air. Air struts, management, tank, compressor, ~60ft of airlines, all of the electricals. Iāve driven on them for about 4k miles, so everything is in great condition. One thing is the front driver side has a really tiny hole...
Need some input on the RSR Super Downs springs for Type Rs. Canāt really find anyone that has them. Want to get some input on it and their experience with them. Howās ride and fitments with 18x9.5 wheels(with 265/35 profile tires). Please post pics if you have any as well.
Appreciate it.
Anyone know if the Swift Spec-R Sport Springs would be compatible with non-Si or non-hatchback models? More specifically, would they work on my ā17 EX-T? Been really interested in those....if not, any recommendations for a set of springs that provide a rather mild drop. Looking for about 1-1.2...
Is there an alternative to trimming the bump stop when installing the Eibach Pro Kit on the Si? Eibach instructions say to trim 20 mm from them. Part of me doesnāt trust myself to cut them ācorrectly.ā I guess what Iām asking is are there aftermarket options to cutting them?
Hi, so i plan on lowering my car with Tein S Tech Lowering Springs... i know i know i should go for better ones or coilovers but being at college my budget canāt reach that yet, maybe in the future a set of coilovers would be great but for now its Tein since its Japan and its friendly to my...
Hey guys, I'm fairly new to working on cars and I'm currently in the process of lowering my 2017 Civic Si on D2 lowering springs.
However, we were able to get all the bolts off for the front Suspension except for the long bolt that goes through the back of the strut. This is the bolt that...
Hey guys!
finally got around to lowering my car and I decided on D2 lowering springs. Love the drop! Donāt love the sunken in look of my HFP wheels on them due to the offset. Not in the market for new tires yet and I love the look of my HFP wheels.
Iām about to order wheel spacers and Iām...
Im sure this question has probably been asked before but I couldn't find anything using the search function.
I don't plan on tracking my car but I want it lowered.
I find the stock suspension to be too soft especially when you do tight turns. I originally had my mind set on a set of...