maf

I have a brand new 2016-2021 Turbo Inlet Pipe for the 1.5L Civic for sale. It’s $372 shipped on their site (without the $30 coupler). I’ll sell both for $300 shipped, ($400) value. It is new, in the unopened box. Ordered it and never went with a bigger turbo kit. But 27won sadly wouldn’t even...

My 2019 1.5T Civic has been stalling when approaching a stop, at about 5 mph it starts dropping rpms and after that it gets to about 500rpms then the car shakes and dies. Also when accelerating from a stop the car jerks at about 5-10mph. I have a cold air intake, catted dp, front pipe, flex fuel...

PRL Race MAF Intake conversion kit. Recently swapped to the street MAF version since i swapped cars. Civic Sport doesn’t come with race maf.. Selling for $200. Open to offers. In the 85251 area.

I recently got a used PRL Cobra CAI from a fellow member on CivicX and he seems to be selling a number of these intake used. All I want to know if the type of MAF I have. It was advertised as street but I cannot really tell. I have attached pictures below, so if you could help me identify it I...

So say someone purchased an air intake to install in their 2017 civic 1.5T Hatchback LX not realizing that the MAF housing was designed to fit the larger 10th gen civic Si MAF sensor. The intake fits on the turbo Inlet and in the engine bay just fine but the problem is mounting the non-Si MAF...

https://www.ebay.com/itm/PRL-Cobra-Cold-Air-Intake-Race-MAF-2017-Honda-Civic-Si-1-5T/164320562149?hash=item264244cbe5%3Ag%3A9Y8AAOSw81pfKFl5&LH_Auction=1

https://www.ebay.com/itm/PRL-Cobra-Cold-Air-Intake-Race-MAF-2017-Honda-Civic-Si-1-5T/164320562149?hash=item264244cbe5%3Ag%3A9Y8AAOSw81pfKFl5&LH_Auction=1

Selling my lightly used PRL Cobra CAI Street version, with Short Ram bonus brackets. It has approximately 2000 miles on it, but had to sell the car for something AWD. SOLD $280 Local Pickup in Norcal ( Murphys CA area)

willing to pick up if located in or near NYC

Anyone know where I can purchase a maf sensor housing that is the same size as stock? I was working on making my own intake today and this is the last piece I'll need to make it. It needs to be stock sized tubing and be able to utilize the stock maf sensor. Wherever I can order this...

For anyone wondering, here is our installation writeup for our 1.5T Cobra CAI. This intake system fits both Si and Non-Si 1.5L Turbo Civic applications. Tools Needed: Ratchet 10mm socket 8mm socket Extension 10mm wrench Flathead screwdriver Phillips-head screwdriver 3mm hex-key / Allen wrench...