hpde

  1. CaptClutch Street/Track journey & build thread - Modifications, lap times, pictures and videos

    Car as it sits today (6-19-2022) Current mod list (May 2022) Engine stuff PRL Intercooler w/ charge pipes PRL Intake PWR Race Radiator Mishimoto oil catch can HKS side-mount oil cooler AWE Track Edition exhaust (also have touring) Body & aero Verus engineering front splitter Verus...
  2. Is anyone using BREMBO LCF600+ or Castrol SRF for HPDE's?

    I'm considering going to SRF simply because I can increase my bleed intervals, but the Brembo fluid is 1/4 the price and has good specs. The Carbotech site says, "IMPORTANT NOTE DO NOT USE Brembo LCF 600+ fluid in contact with any type of magnesium components (e.g. gearbox / clutch components)...
  3. Track Day Insurance - $300 Reasonable for Type R with a few mods?

    Hey everyone - I'm thinking about signing up for my first track day and want to get track day insurance. I got 2 quotes for ~$300 for my 2018 Type R with $5K of "modifications" (based on a 15% deductible). Is this reasonable? I thought it would be cheaper than that, but maybe I'm just wrong...
  4. Hondata CTR Track Mode

    @Hondata As we've seen a bunch of people on track are seeing high temps. Can you guys program a track mode where the ECU keeps the radiator fan and condensor fan running while on track? Like holding down the +R switch for 5 seconds or something? Then track mode shuts off once the vehicle is...
  5. Civic Type R at the track, goods and bads! Let's share our experience.

    Sorry if a similar topic exists, but I did not find anything. I thought we could share our experience as we start tracking our cars more and more. Here is mine: I have been to the track twice. Once at Laguna Seca and once at Buttonwillow. Laguna Seca I managed a 1:47.1 lap time. Car was bone...
  6. Went to Indy for a 3 day HPDE with the Porsche Club. My FK8 findings. Lots of Pics.

    Ok, I might forget some things that transpired over the weekend, so I reserve the right to add them as I remember them. First off, flushed the entire Brake system with Prospeed 683 brake fluid. (Inner and outer Front bleed screws 11mm, rear bleed screw 10mm) Coated the rims with CQuartz. Front...


Top