fuse box

  1. Accessory Fuse 1 Keeps Blowing

    I drive a 2017 Honda Civic LX, I have nothing aftermarket installed (see exception below) and normally have an iPhone charger plugged into the USB port. However, even with nothing plugged in at all, my accessory fuse (10A, Fuse 1) keeps blowing. It's only after I start the car, it's not on...
  2. Add-on fuse box - is this correct?

    Hey all, I'm fairly comfortable working with electronics but not so much at designing my own circuits so I was wondering if anyone has any input on this. Right now I'm running two accessories off of one +12V switched ignition add-on fuse tap sources. There's a possibility of adding more in the...
  3. Req: [solved] Run wire from Engine Fuse Box

    So this is solved, I'll just have to bite the bullet and make a hole as small as humanly possible. Thanks for the help!
  4. Fuse tap for remote wire

    Looking to fuse tap for remote wire for audio system equipmen. I will be running a JL Fix 82 & Twk D8 and then 5 channel amp. For the remote wire to Fix 82 and then remote it out to the Twk D8, I'm thinking the 10amp 'Accessory' fuse in slot #1 will do alright but curious if anyone thinks...
  5. Terminals to add fuses and relays into existing fuse box?

    I am in the progress of installing a beefier horn in my civic to complement the pip squeek it has now. I plan on putting it on it's own fuse and relay so it can still be controlled by the wheel's horn button. I would like it to wire it in to the existing fuse box in under the hood. I have 6...
  6. Request: Removing interior fuse cover - Closed

    Hello, This will be my first time removing the fuse cover on the Civic as I was accustomed that the fuse box was in the hood area. Can anyone point me to a tutorial or just a guide on how to remove it? The 12V outlet is not working and my suspect is that a fuse might be the culprit. TIA
  7. Adding Driver and Passenger Feet Lighting 2016 Honda Civic LX

    Hello Everyone, I plan on adding Driver and Passenger Feet Lighting that shine onto the floorboard in my 2016 Honda Civic LX. I was going to use the color white and connected it to a switch I can turn off and on. What would be the best setup to do this with? I would like to hide wires and not...
  8. LED Footwell Lights

    I installed an RGB LED light strip under the driver and passenger side footwells. For now, it is wired to the 12V port, which means when the car is on, they are on, and when the car is off, they are off. I think it would be nice to wire them in with the daytime running lights or something, and I...


Top