fitment

Hey everyone so I recently went to get an alignment to maxed out the camber all around and I was told that I can’t max out the rear bc it would affect the toe too much. I am maxed out all around on the Coilovers and are running SPC rear camber arms. I was just wondering if anyone else has run...

I've seen others on the forums running anywhere from 235-255 tires on their 8.5-inch wheels, and I was wondering if there were any real pros or cons between these? Obviously, I'd assume the 255s would in theory have better grip since they are wider but I'm worried about any bulge or swelling...

Hello everyone so I recently purchased a set of flex z coil-overs for my 2016 civic lx sedan and I’m curious if you guys have some good suggestions for how much of a drop I should do I’m looking for something practical and comfortable for daily driving but also does something about that...

Hey all, I have a set of Desmond Regamaster Evo IIs in 18x10 +50 coming soon and am wondering if my desired tire fitment will rub. I am staying on stock suspension and want to run Michelin Pilot Sport 4S in 285/35/18; the overall diameter should be 25.9” which is close to the stock diameter of...

What's going on CivicX Fam, I just wanted to take a second of your day and talk to you about the competition we will be hosting on our Instagram. The winner will receive a $500 gift card, and a signed Artisa wheel from all of us here at the FI Team. How to Enter? Have you car in our...

I'm set on the wheel size which is stated above sitting on skunk2 springs for now. I am looking for a more aggressive look. I noticed these are the most popular 245/40 255/40 255/35 or 265/35. I'd like to see some different tire sizes and brands as well as modifications needed for the tire...

Post up your best photos of your aftermarket wheels & tires and any experiences you've had with the setup! A lot of people when buying their car might want to modify it and make it a reflection of themselves. What's an easier thing to do then to give it some new wheels! Using this thread lets...

What type of wheel and tire setups are you all running? Have you had any issues with your setups so far? This has got to be one of our Favorite setups from our Gallery! icy.si's 2019 SI Rays Engineering 57xtreme Gramlights 18x9.5 40 Wrapped in some Firestone Firehawk Indy 500 235/40

So, I'm about to pull the trigger on some new wheels, tires, and lights. I'll put the links at the bottom so you all can look at them. But, is there anything I'm doing wrong, as in am I buying the wrong thing or is there additional stuff like adapters that I need to buy? I just want to make sure...

photos hopefully in order, this is a DIY and I did it without removing the hub idgaf if it's not the RiGhT wAy of doing it... it worked for and it works :) my wheels are BBS RGF 19x9 20jj on all corners I needed an 8mm spacer to clear the brakes so I needed extended wheel studs 1) remove...

I have some aodhan ds02 wheels that are 18x10.5 i want to run them as rear wheels not sure what tire size to go with though im currently on the truhart springs so its about 2in lower than stock .Any ideas for what i could run ?also my front wheels are 18x9.5 with +30 offset

I’ve seen that a ton of people have the eibach products and I want the eibach pro plus springs and a sway bars kit and I will get camber and struts too. I’ve seen a lot on the si’s fitment but is that the same as the fitment I would need on the 16 ext and if there’s a thread that answered this...

Selling my white Work wheels, almost excellent condition no curb rashes, just a minor nick from the shop mounting them (shown in photos). Selling the wheels only, going swapping the tires back to the stock wheels. About 13,000 miles driven on the wheels and will be only slightly more as I keep...

Sooo,I got confirmed Fitment Fitment industries and it turns out the front don’t clear the factory brembos This is the 4th car I’ve ordered from Fitment industries and never had Fitment issues at all so I didn’t really do any/much research on offset Fitment for the ctr 18x9.5 +35 and I’ve...

Sooo,I got confirmed Fitment Fitment industries and it turns out the front don’t clear the factory brembos This is the 4th car I’ve ordered from Fitment industries and never had Fitment issues at all so I didn’t really do any/much research on offset Fitment for the ctr 18x9.5 +35 and I’ve...

Buying a set of Gramlights 57dr, and I'm not sure which size to order. I'm looking for a flush fitment. I'm on D2 racing coilovers. Any advice?

Hello! I’m selling my air suspension. Everything you need to be on air. Air struts, management, tank, compressor, ~60ft of airlines, all of the electricals. I’ve driven on them for about 4k miles, so everything is in great condition. One thing is the front driver side has a really tiny hole...

Soo I recently bough a set of Rotiform R140 RSE with Wheel specs being 18x9.5 +35 with my stock Goodyear Eagle Sport 235/40R18, For my 2019 Civic Si Sedan. First, The problem is I dont really like the stretched fit, I'd like to know how I can get a flat side wall on the tire with the rim that...

Hey guys new to the forum. Have had my 19 Fk8 for a year now and decided now is finally the time to get wheels. Does anyone have any pictures of a type r on work emotion D9R wheels? The sizing I want is 19x9.5 +38. I was told they clear the brakes, but was also cautioned by a friend that the...

Whats up honda fam need some help. Just installed D2 springs on my SI and after the job was done I only had two pieces of the bump stock we cut off the front. We forgot to do the rear because we were able to swap the spring without removing the strut. I only drove around about 20 miles since the...