Currently running stock with 18x9.5 offset +35 with tires size 255/35ZR18XL and 15 mm spacers. And Iām considering on getting lowering springs and make the car lower by a little bit.
Iām wondering whatās the best/safe thing I should do.
Hey there!
This is my first post being I got my FK7 a little over a month or so ago. Iāve been slowly looking around at wheels and such and am a little unsure on the best specs for a really flush and full fitment on oem suspension, I am thinking of possibly going on lowering springs in the...
So I am buying a set of 2020 SI stocks for a daily set of wheels to preserve my 200tws for the track (also wet safety). I have seen things about +20mm in front and +25 in rear for spacers for flush but havenāt seen any photos of a car with that from a point of view like below. So I just donāt...
Looking for 20mm spacers for my civic as well as a set of springs. Eibach sportlines would be great but Iām not super picky atm if the price is right. Thanks
Hey. Iāve only had my civic for a short while now and I bought it used at 60k miles. Is this too high of a mileage to put it on springs with the stock suspension being a bit older? Iāve heard mixed responses. Thanks
I've recently installed a skunk2 catless downpipes seeing it's the only hatless downpipes currently available for the 10th gen si. The thing about this downpipe is the it comes with a front pipe as well. After looking at different exhaust I decided I wanted to go with the AWE but after closer...
Hey guys,
I'm trying to see if any of you had or have this problem, and if so, did you resolve the issue.
Me and a buddy installed the downpipe and front pipe today. Let me first say, my rear motormount is upgraded with a Torque Solution 75A RMM. And I have the Invidia Gemini exhuast.
After...
Hello, I think that I have finally decided what wheels to get for my Black 2017 Coupe Touring!
RPF1 In silver.
By searching around a bit, I have determined that I should probably get the 18x8.5 + 40.
If anyone has any experience with this fitment I would love to know what size tires to run...
I have a 2017 Touring Coupe in black and I'm having some issues determining which wheels I should get.
I have 3 pretty good options and I'd like your opinion.
Enkei RPF1:
Enkei PF01:
AVID1 AV20 (Color is a lot different on real life pictures than the stock one):
I think I might perfer...
So I have a 2017 Coupe Touring in black (no picture because it needs a wash š¬) and I've been looking for some nice aftermarket wheels!
I've come across a couple, for example, rpf1, xxr 530, and xxr 527 but I'd love to see what other people are running!
So if you have some suggestions...
As the title says, if you have a Black Coupe with Gold RPF1's please post some pictures! Also please post what specs the wheels are and if you rub at all.
Thanks in advance!
I'm not sure how many people have tried pushing more camber from their coils, but I hope this helps
I've been trying to figure out how to get more than -2.5 degrees on bc coils for the front struts, as many know, any coils for the hatchback(except type r) do NOT have extended camber plates and...
I have a 2018 civic lx on stock suspension currently sitting 4 inches from the ground due to my side skirts. I was wondering whether I should lower 1 inch or 2 inches, and if there are any issues I could run into while doing so? The 1-inch drop would most likely be the more beneficial decision...
Whats up everyone, I recently got my fk7 lowered on a set of D2 lowering springs on my stock wheels and I see that my tires are a bit tucked in. I was wondering if any of you are lowered on springs and have flush fitment? Also, what kind of wheel spec would you guys recommend for me to have...
Iām looking to get a new set of wheels for next summer but I could use some guidance. Iām looking at the Enkei NT03RR 18x9.5 +40 because I really like the design and I know it will clear the massive genesis coupe brembos. For tires I was looking at a 245 or maybe 255. Not sure how wide I can go...
Evening, I have ordered some Eibach 25mm spacers for my FK8 Type R, currently everything is stock and it is a UK model.
I just wanted to make sure I won't have any issues, mainly from rubbing on the outer wheel arch when the suspension is in compression? My aim with these spacers is to bring...
Im looking at getting Regamasters for my Si Coupe but figured i would post around to see if anyone might see any issues that i am overlooking. The research ive done shows that they will fit no problem but just in case.
The wheels im looking at are 18x8.5 +38.
I dont think these will poke quite...