EX model lower balljoint stud size is 12mm. Sport/touring model lower balljoint stud size is 14mm. I believe that is the only difference in the knuckles and can be interchangeable. When i was looking at sport knuckles i could only buy one side and the other was discontinued… not sure if its...
I have PRL cobra, when I installed intake the cvt cooler was alittle in the way but with minor adjustment was able to move it around alittle bit and it still fits behind the drivers vent. I think i have to take it off the original bracket and ziptie instead.
Finally paid off my loan. Took forever but will have a lot of stress relief knowing i don’t have anymore payments. Now i just wait for my title and look into cheaper car insurance!
Here is some reference photos. Can mount in driver vent or on top of crash bar behind grille. Cvt warmer comes off filter pulls out new filter in sandwich plate on then warmer back on top. It is a little bit of a difficult position with little Amount of room but thats like every part.
Well it connects to the CVT warmer plate which is located in front of the filter. I would call it a “CVT sandwich adapter plate”. I have read some people ended up having leaking issues when they installed theirs and had to go back and fix it.
I run ETL CVT Cooler and helps alot especially for shorter drives and lower speeds. Cvt temps will be 165-170 ish for normal driving but if im on parkway or highway going high speed for a long period of time temps will be 185ish. Pushing the car hard going WOT i can reach 200s and once the temps...
Ok i just got around to tightening them up, its a very awkward and difficult situation i was able to take a 5mm off of the hex set insert into the thread hole and then put 90* tip needle nose pliers under through LCA hole and hold it in place then used a mini adjustable wrench to tighten. Seems...
The other day i swapped out my rear accord end links for the rear whiteline adjustable end links and yeah was kindof a PITA to tighten i ended up using the 5mm from an allen key set and a small adjustable wrench. For some odd reason i wasnt able to get the allen key in the passenger side...
I added an FK7 badge to the rear of my car painted blue. Bought the badge lettering from advanced auto parts. Haven’t seen any other FK7 style badges.