I haven't gone through with anything but I did some talking with some HPD guys and they were mentioning that they were going to swap the knuckles from a si so they can get those options. Which doesn't seem like a bad idea I just need to do my research to make sure I know what other parts are...
I would consider reaching out to Chris. I have chatted with him at autocross a couple of times and he seems he has a wealth of knowledge when it comes to 10th gen transmissions. Looks like he is also putting together a how to build series on YouTube. Hope this helps...
For the BBK that is being offered on your website, when should we hold out for the track calipers? Since the biggest differences are the coating and piston material, for a hobbyist level track day goer, are the street calipers enough? Or should I just wait until the racing ones are back in stock?
I did my first track session Thursday at Gingerman with my fk7. I was hoping my upgraded pads (Hawk HPS HP+) and rotors (EBC Slotted) were going to be plenty for a 20 minute sessions. And when I was on track they performed fine. I wasn't looking to be fast just, get familiar with the track and...
It might help if you follow rules 1&2 at the top of the page. Not posting photo of the product or of the box doesn't inspire confidence on an online sale.
Any updates on the Silvers? I am looking for a set for my FK7 as well. Curious what you think. And what is your primary application for the coilovers? Street/Autocross/Track?
@Unity Performance I am looking to become more competitive at autocross. I have done it for 3 seasons consistently at my local region for fun, not really caring where I stack up. But now I have a set of Falken 660s, I am ready to push and focus. For reference I have a '21 Civic Hatchback running...
Any updates on this? I installed an aftermarket intercooler and cruise control doesn't work at all. It did for maybe 15 miles after completion but now it's completely dead. I had a U0104 code that I cleared hoping it would fix the problem but now it looks like the radar detector may need...
Did you ever get this sorted out? I put an aftermarket intercooler on mine and started having the same issue. I was able to drive for 15 miles after the install before I started having issues though.
I can't say I am pushing high torque but I will say I have stopped driving in modes 1 & 2 and now only drive in mode 3 and have no issues. 3rd gear pulls the hardest but I think that is because I have the boost turned down in 4th gear still.
So final update: Clutch is broken in and car has been trashed around. Oh my word, what a difference.
After pulling the transmission out again and taking the case apart, I got the sensor out. I struggled getting it back together for a bit but turns out a piece of plastic was stuck between the...
Harbor Freight is really good for these specialty use tools. I got the engine support bar and made it work. Was it what the Honda Service manual tells you to do? Not at all. But it works.
https://www.civicx.com/forum/threads/how-to-suspend-engine.73912/post-1129342
Also the transmission jack...
So I ended up sending out my transmission to Synchrotech-transmissions for them to essentially rebuild my transmission. Took about 6 weeks but no local shop wanted to touch it. They just said for me to get a junkyard transmission. I got everything installed last week 6/2 but did not have any...