Yes, they actually do but I was referring to bigger piping than the ones supplied in the HKS IC kit. I remember reading somewhere in the forums that some IC’s like mishimoto or prl are compatible with upgraded IC pipings from other brands. Wondering if the HKS IC can also do that as well
Hi guys
would like to know if anyone has already upgraded their stock intercooler pipings specifically for the HKS Intercooler on their 10th Gen civic 1.5 sedan.
tried to search through the forums but was unable to find posts regarding this. Saw posts about prl, mishimoto, ingen intercoolers...
Yes, I read that you can go the easy route of just breaking the tabs off the old H and installing the new one with just using double sided tape. However in my case, IM looking to install the dark chrome emblems as factory as possible, using the rivets that come with the H emblem :)
Hi guys,
I’m planning to swap out my emblems to the dark chrome Modulo ones, however after doing some intensive research on the topic , it says that I have to remove the rear plate garnish if ever I’d want to do it “the right way “ and use the emblem rivets .
In anticipation of removing the...
It's significantly stiffer than the stock suspension, but nothing unbearable. It's a little bit softer to the softest setting of the Ksport coilovers I had
I can vouch for this. You don't really need a rear camber kit for springs that just drop around 1". In my case, the Swift Spec R springs I have didn't really need it as it barely had enough drop to affect the rear camber drastically ?
Just want to share pics for everyone's reference
Enkei TS9 18 x 8.5 +35
Muteki SR35 lug nuts
Kyoei valve stems
Westlake SA57 235/40/18 tires
Swift Spec R springs ( 1.1 inch drop all around )
SPC Rear Camber Arms
The weight reduction was around 7lbs per corner compared to the factory 17 inch...
This thread was really informative and helped me make a decision which brand to go for, taking into consideration the road conditions we have here in the Philippines; pot hole ridden with an occasional mix of small but sharp speed bumps. :D
Anyway, after careful consideration of the data shared...
Finally got to install the Swift springs after waiting so long for shipment due to the pandemic.
They really are the best compromise for those looking to get the best performance short of running a full coilover setup due to its linear spring rates. No binding on mine at all even when driving...
I hope this thread is still active :D
Any updates on when full support will be provided to 1.5 turbo models here in the Philippines? Specifically software num 5AG - N810 ?
Hope other members from the Philippines with their Ktuners can also chime in.
Thanks Ktuner!
Hi guys! Hope all is well with everyone at the moment
im looking to have car parts shipped from the US to the Philippines and was wondering what options are available to do that. Inquired with UPS and Fedex and the estimated cost amounts to 280 plus dollars to do that to have the items...