Search results

Hey y’all, does anyone have a recipe/routine for their track coolant? I’m staring at my 2L half full bottle of Honda coolant and wondering if another 2L of distilled water will fit in that bottle that held 3.8L previously. I’m gonna do a 50-50 mix of coolant and distilled water with some VP cool...

I have a set of used Paragon 2 piece front rotors. The hats are less than a year old and the rings are less than 2 months old with one track day on them. The rings have some surface cracking but nothing deep or to the edges. They are heavy so pickup preferred in the DFW area. But I will ship at...

I want to get the Paragon BBK. There’s a no return policy if it doesn’t fit. They have a template to check your wheels for clearance. I used the template and as far as I can tell, it will clear the 18” Gram Lights DR57. BUT they make mention that aftermarket ball joints may pose fitment issues...

Hey y’all, Thanks for your time. So, the brakes seem to be giving me a problem. Two events ago, I had some brake shutter so bad, it felt like wheel hop. I felt it mostly on hard braking and some on turn in. I tried to power through it like it was a bedding/surfacing thing but no dice...

I love not breaking clips and causing more rattles. Any advice or tips for removing the rear panel without causing damage. Most people/posts just say to pull hard. Thanks for any advice.

I have a used but good Eventuri carbon charge pipe V2 for sale. These retail for $945. Asking $250 plus shipping. I bought it used, but wasn’t excited enough with its condition. But maybe someone can use it. The top part that is visible looks pretty good mind a small area of slight brown...

I don’t need this anymore. Used but great condition. $25 shipped.

I just got this in the mail. I’ve seen a few posts about people’s AC going out. Was this the issue? As a lifer, I was starting to worry when mine would go. But this seems like a nugget of reassurance. Wanted to spread the word in case the mail miss y’all.

Car is a 2020, 20k miles, 15 HPDEs, MOTUL RBF600, Paragon R5 pads. Had a front inner pad go backing plate to rotor last event. It was the only one of the front three to wear so fast. Fluid leaked out of the bottom of the caliper and wheel balancing weights fell off on the left, I think from too...

Update below: Would y’all attach a tow strap to this rear jack point? I obviously don’t PLAN on using it, but in an emergency would it hold up? My HPD group requires both front a rear tow hooks and I have an aftermarket bumper. I’m trying to avoid using the crash bar because that means...

Is this normal? I was looking under the dash to see the master cylinder. I was thinking about doing the adjustment. Then I noticed what looked like a drop hanging from the rubber boot at the end of the brake pedal. It’s a clear oil. It smells kind of musty, and I just had manual transmission oil...

What front negative camber are y’all running at the track? Is -3.4° too much? Had the J’s Racing front camber joints installed and alignment done today. I was looking to start with -2° to -2.5°, track and go from there. They don’t come with instructions to say exactly the degrees you get with...

I don’t want to do another track day without a fire extinguisher. Not just for me, but it could save someone else as well. A tragic event happened in the last month in my area, multiple system failures at the track and personal fire extinguishers may have made a difference.

What are the downsides to changing MTF to something aftermarket? … i.e. MOTUL gear 300, Amsoil synchromesh, etc. So, after 5 track weekends last year and 10,000 miles I’m making the decision to change the transmission oil. We are sending it off for analysis to see when is the right time to...

Kind of stupid but why not share. I “felt” a difference, but wanted to actually know. So I checked! 5.4lbs lighter. Can’t wait for new rotors to save even more weight! The stock wheels are in newish Falken FK510s. The other wheels are 18” 57DRs in pretty used RE71Rs.

I have girodisc s/s pads up front. 4 track days and some daily driving on them. They were squeaking a bit and I’m working on replacing a wheel stud right now. So, I took them out and had a look. There is like a lip of material forming on the edges and looks like some fissures in the pads. Are...

Right now, it’s soaking in PB blaster. I can’t get it out. I bought the the Vessel P3 impact driver. Every video I watch, the mechanic hits it like four times and it’s out. I’m on hit like 400 and nothing. Any thoughts?

I have a 2020 and the OEM 2 piece rotors. I know with the 2 piece Girodisc and Paragon rotors, they offer replacement discs instead the whole set up. Are there any OEM replacement discs? Will the aftermarket replacement discs fit on the OEM “center part?”

Does anyone have a Rays locking nut key I can borrow? I think it was a #27 but not 100% sure. Thanks for any help.

I get a CEL every now and then when I track the car. Not most of the time. On the dash it says “emissions system problem.” No symptoms as far as I can tell. Scanned and got code P0136:00. Low O2 sensor voltage. I have a RV6 high flow cat with defouler and Hondata 91 oct with downpipe basemap...