Search results

  1. The Tuned CivicX Experience & Reliability Thread (for all models)

    I check the oil every few weeks as I have a relatively short commute, but never noticed anything different. But never had the oil tested or anything like that. I've seen threads debating oil weights but figured stock weight was fine since I really wasn't pushing crazy horsepower or torque...
  2. The Tuned CivicX Experience & Reliability Thread (for all models)

    I was using Castrol Edge Full Synthetic, 0W-20
  3. The Tuned CivicX Experience & Reliability Thread (for all models)

    Vehicle: 2016 Civic EX-T Coupe (CVT) Total tuned time: About a year and a half Tuned miles driven: 30,000+ Tuning device(s) used: KTuner 1.2 Tunes used: Phearable's 1.5 Fuel used: Exxon Mobile 93 octane Additional related mods: Mishimoto Intake, Mishimoto Intercooler, Custom Flowmaster...
  4. Has anyone had any luck installing the HFP style sideskirts by Ikon?

    Oops, I meant Aeroflow Dynamics. I was looking at Downforce Solutions for a rear diffuser and I mixed them up. This is what I ultimately went with. https://www.aeroflowdynamics.com/products/2016-honda-civic-coupe-side-skirt-extension-v4 These won't fit the sedan, but they have other stuff on...
  5. Has anyone had any luck installing the HFP style sideskirts by Ikon?

    No. Unless you're willing to drive self-tapping screws into the side of your car or have some way to 3D print or machine some custom method of attaching them to the stock mounting system, they aren't worth the money. I just ended up getting some side skirts from Downforce Solutions. Completely...
  6. Has anyone had any luck installing the HFP style sideskirts by Ikon?

    Update: After a few weeks, the tape has started to fail. The fitment of these things is just too off to work properly. Every time I open the doors, they push and pop loudly against the side skirts and pull on the tape. If you have some body work experience and don't have a problem with altering...
  7. Has anyone had any luck installing the HFP style sideskirts by Ikon?

    The quarter inch tape was my last ditch effort. The whole roll was $8 on Amazon, so it might be worth a shot. Make sure its the VHB stuff by 3M. I also did mine in 2 sections. As soon as you pull the plastic off, push hard and hold. After a couple of minutes, it wasn't going anywhere. Once that...
  8. Has anyone had any luck installing the HFP style sideskirts by Ikon?

    I used quarter inch thick tape. There isn't much for it to grab to, but its so strong it actually worked.
  9. Has anyone had any luck installing the HFP style sideskirts by Ikon?

    It clears the door with the door ok, but one side does creek and pop a bit, I may have to readjust it some. I did manage to get them to work, but it did take some 3M VHB double-sided tape. I basically ran it along the very top edge of the side skirts. You have to be patient because you...
  10. Has anyone had any luck installing the HFP style sideskirts by Ikon?

    Good luck, let me know how it turns out. I'm thinking I'm going to take a heat gun to them to try and gently bend them towards the car and use some 3M tape to secure them to the car.
  11. Has anyone had any luck installing the HFP style sideskirts by Ikon?

    Basically what the title says. I ordered some HFP style side skirts by Ikon and had them painted Berlina Black to add some contrast to my coupe. I think they look great, but they don't install like the OEM ones do. They don't have any way to use the clips that the stock ones have to keep them...


Top