Search results

2016 EX. 6 years and 160k KM/100k miles and still going strong.

Because people are idiots and dont know how to drive especially with reduced traction

I did this brake service once. It was a scam. They didnt do anything because 2 months later one of my caliper slides seized. When i removed it, it didnt have grease and was rusted hard inside the bore. The other slide pins had barely any grease. Then they told me my pads had a few mm and...

update: replaced the pads with centric posi quiet. clunk is now gone. zero noise. size of the bosch/centric/oem is practically identical(measured with digital calipers, maybe 0.05mm diff from pad ear to ear bosch/centric vs oem). the only difference is, the bosch has a shim that has tabs and...

put a tarp on it

you want to print with ASA. higher glass transition temp than ABS(112c), stronger than ABS, more weather resistant than ABS, more chemical resistant than ABS, easier to print than ABS.

just installed new pads(bosch quietcast) on a 2.0L. now i have the clunk/pop too when switching between reverse and forward.

Yes it's perfectly normal, and it happens to all 4 of my different vehicles when I jack them up. As soon as the car rolls the suspension settles back to normal.

https://github.com/HackingIntoYourHeart/Unoriginal-Rice-Patty

Yeah the preferable way is to pump the pedal till firm, then you take the epb out of maintenance mode. The way the epb stops is by sensing the current delivered to the motor(the motor only has +ve-ve leads, so the only feedback is electric current. No signal wires). When its pressing at the...

i had this problem on another vehicle (not honda). basically the check valve for the vacuum in the brake booster is leaking,so you lose the stored vacuum overnight and pedal becomes stiff like pumping it a few times. dealerships will tell you everything is AOK and that they tested the whole...

i think you pumped the brake pedal too many times with the car off(no more vacuum assist), so now the pedal is so stiff, it cant turn on the brake switch(hence why your brake lights dont turn on), and that will also prevent your car from turning on. look under your brake pedal, there will be a...

Hit the voice command button (bottom right button on the steering wheel,under the info button). It will bring up a screen. Say Voice settings. Then go to system settings and factory data reset. Hopefully with a fresh wipe everything will be working properly.

125k km 2016

Looks like peeling clearcoat. Those shady dealers probably put some kind of wax to hide it like above poster mentioned, and now it dried up.

How did it break? Dont know exactly this civic, but some cars have a notch and you have to move the hub till it hits the right spot.

2016 civic here, also canada. Front bearing went out at 75k kms . It did make a loud humming sound when driving.

Can you post s picture of the springs and bearings please

What happened?

Only way to find out is to crimp or solder. If not then might be an issue with the radio