Iām also using a couple different calculators to try and figure it out so Iām not positive on the accuracy. M3/s to lbs/min isnāt a common or easy conversion for air flow. I wish we could get an exact answer from mhi. The g25-660 flows at 61 lbs/min and I live by prl and have friends that work...
Iāve gonna try downloading on the laptop. I tried on my phone the other day and the password wouldnāt work. Hopefully it works then. If not would you be willing to email that section to me?
šš is the service manual working for you? I havenāt been able to get it to work it just redirects to the civicx home page š I was super excited when I originally found that then got disappointed and canāt find any other ones.
Does anyone have the Srs airbag system service manual? Iām gutting the majority of my car. Removing the sound deadening and all the airbags and plugging in resistors and want to make sure I get all the air bags and plugs.
The car is getting a full cage installed in November before anyone...
Installed the Hasport 82a engine mounts last week. Install wasnāt bad, tranny side you have to remove your intake, battery and tray and unbolt the ecu to get to a couple bolts. I would however do the rear first if I were to do it over again. To get the rear mount bolt to thread you have to move...
So I forgot to update this. Iāve since installed and purchased a bunch of parts to install this winter. Iāve done five or so track days over the summer. Still loving the car but still a lot to work on. Cooling problems are still a thing even with the 2020+ models. I plan on installed a c&r race...
Did the acuity shifter cable bushings today. I did not take the battery and charge pipe out to do them. Small one took 5 mins to do. Putting the retainer clip on the bottom was the hardest part. The bigger one took 2 mins 26 seconds to do. I have average sized hands and think itās unnecessary to...
Installed the @ACUITY fully adjustable shifter today. Install is fairly easy and Iād imagine you could do it with very little know how. They provide great instructions written and on a YouTube video. Took about an hour and a half and most was trying to get my shift knob off. Also forgot to put...
First track day in the type r was today 08/18/20 at Pittsburgh international race complex. Temperature was 81 most of the day. I had zero issues with cooling which I believe is cause of the low ambient temps. I still donāt believe itās solved but only time will tell. I donāt see the car being in...
This weekend I got the car ready for the track day on Tuesday so I swapped my stock pads with raybestos racing pads, changed the brake fluid to motul 660 and installed sakebomb garage stainless brake lines. Pads took about 5 mins per side as with all brembo calipers. The brake lines were also...
Thanks! Yeah I donāt understand the drag car builds with this platform but to reach their own haha I canāt wait to get this car on the track next week. I got tons of stuff just sitting in boxes waiting to get put on ?
youāre probably going to be waiting till September starting another order. Everything is delayed doesnāt matter who it. Everyone did the same thing and bought whatever was in stock to get it sooner. Youāre just restarting your wait time at this point.