Howdy yall
Up to 88k miles now, tensioner showed past due for a belt replacement so I grabbed a mistoboshi brand one because oem availability is slim near me,
I replaced the belt, the hasport motor mounts mean I was able to do it just from the engine bay and the flap held by two clips on the...
Howdy, I bought this probably around October '21 and many things never happened. Never got a custom tune, so I never put in a new clutch, so I never needed this kzcmc made by Eman.
With how life is going, I'd rather it go to a good home than sit on my shelf.
Asking $275 obo I'll add a photo...
Howdy, I've got a 17 civic SI with about 82k miles right now. I wanted to lower it, and I wasn't sure if it would be worthwhile to throw lowering springs on for some time or if I should go full coilovers right away.
A local 10th gen si to me has just as many miles but has been riding on D2...
Howdy,
Went a different route, the past season moved too slow and I never got around to a custom tune or clutch swap.
Asking $350 shipped or $300 local
I'm moving and trying to sell these parts so I have less to move and as much on hand cash as possible for the move.
$200 SOLD- Catless downpipe with 3 band flange adapter (let's you use factory fp)
$200 - PRL cobra cold air intake, SI RACE maf
Howdy! This is long overdue, and I never started early, nor made a journal, but I wanted to share what I have done so far. Coming soon will be descriptions, or mini-reviews of each part.
Engine:
Ktuner V2
TSP Stage one plus tune
PRL Intercooler
PRL Charge pipes
PRL Cobra street maf cold air...
Howdy,
Trying to chase down some suspension gremlins. I was due for tie rods and ball joints, so I picked up some moog inners, honda OEM outers, and SCP static ball joints. Install went OK. Got the car aligned at my local honda dealership, they gave me a big stink about "modifications" but it's...
Hello, figured this is a long shot.
Looking to trade my catless RV6 downpipe with the vband clamp, for a catted RV6 catted downpipe with vband clamp.
Rv6 stopped selling the catless due to the EPA, and I don't want to switch & swap for each inspection, so I'm hoping for a trade with $ on my...
Howdy, I'm trying to chase ghosts, namely fuel trims. From most information I've been reading, short term trims should be within 10% positive or negative, and long term much closer to 5% positive or negative. I keep seeing everyone post their 0 to -3% fuel trims and so I want to look into it...
Howdy, have been doing upgrades.
$50 - sold OEM Si Intercooler and charge pipes (replaced with PRL)
$20 - OEM SI shifter (replaced with Acuity),
$30 SOLD - all three motor 1.5L motor mounts (replaced with Hasport),
$20 - OEM Si Rear Sway Bar and end links (replaced with whiteline)
$50 SOLD -...
Howdy. Recently did a DIY muffler delete and it's the tone I want, but the cabin drone is a little much around 2.5K rpm to 3.5K rpm for a "daily".
Before I drop money on a REAL exhaust, I'm looking to see if someone will let me hear their AWE, Invidia, or similar exhaust, to help me make a good...
Upgraded to the 62A hasport motor mounts all around this weekend. Install went good, major improvement for the car.
During the install, when removing one of the nuts on the studs, the stud snapped. Was a big "oops" moment as I'm holding what looks like a bolt. There was plenty of thread on it...
Howdy!
I was looking at different plate mounts for the 10th gen platform, the raceseng specific one was appealing since it can double as a towing solution with an appropriate attachment. I was having a hard time finding what it looks like on a sedan/SI, the only two images I can find for 10th...
What is the best way to diagnose and fix this squeak? Is intermittent depending on temperature, humidity, and temperature of the parts. Pulling away from stops, the loudest thing at the intersection is my rubber duck clutch lever.
Does the slave cylinder need to be regreased, or the point of...
Hello friends,
I'm currently running 18x9.5 +38 wheels and 255/35R18 tires, which give a bit of poke on the stock suspension. I have a three finger gap on all three corners.
Looking at lowering options, can't be more than 2" for state inspection. Will come through the lowered thread but does...
Howdy, 17 civic SI sedan,
When installing the ultra racing strut tower bar it looks like there is not enough stud to thread the nuts on. I made sure its torqued to 46 ft/lbs and added paint marker to ensure it's not coming undone.
When I look for other pics of mention of this, it seems to be...
Hello! First, I am aware that knock control is more important than knock count in our cars. Just trying to make sense of phantom knocks that are reoccurring, incase it is an early sign. I'm using Ktuner V2 with the TSP Stage One+ on a 17 Civic SI, with PRL CAI and Intercooler. My plugs are OEM...
Hello!
I installed the Acuity Throttle Pedal Spacer. Part of the instructions is to unhook the connector. Realistically, you can install without doing so, but I didn't want to put tension on the wires, so I used a flathead to pry the connector off, like what it shown in the video install...