Hello, I have a question: does anybody knows how to disassembly this panel. The idea is to paint front side in black piano.
This current view of my Honda interior:
I want to paint the element marked with crosses (panel is for RHD but it is ok to show the idea).
As I mentioned - I have Type-R seats (I swapped them from the original). They are without heater.
What would be the PN for the panel with the screen and without seat heater option.
Would be good to know the PN for US and for the Japanese/Canadian version
Based on informations from above - I need the unit from Canada or from Japan to be sure that it will be compatible with Celcius degree.
I guess it will be difficult to find.
Also ... I need the version without seat heater buttons.
For the information ... this is my interior view - the R-Type...
Thanks for the reply.
I see no problem with dual control issue.
I own at this moment OEM head unit replacement from our china friend. There is no temperature value on the screen - so this would be also not a problem. The screen would be the big improvement over this what I have right now. At...
Hello
My civic is the 2017 hatchback model, Sport Version (1.5T).
I own at this moment following climat control unit:
I would like to change it to this one:
Will it work? I would like to know if the screen will be functional and all of the buttons.
What about the "MODE" button. Is it...
I had no subwoofer in my car - it is european Sport model. 2 speakers in each door, nothing more.
The internal volume is something about 11 - 12l. Not much, so 8 inches was the "safe size" in my opinion. After Bass Reflex instalation the sound is more than satisfying. It is deep enough, with...
The whole job was done by me. I had no expirience, only this what i saw on the youtube materials. The original box was prepared for 10inch speaker. At the end I have 8 inch JL Audio speaker and Ported box. After adding bass reflex the sound is fuller and touching low end frequences. The main...
You don't need to drill anything. After tweeter detaching you will have a clear hole for new tweeter. Easy.
The speaker it is a separate piece which you need to disassembly from glossy black ring.
You have to remove/detach the door panel. From the rear side you will have the access to the tweeter. The old one must be removed - it is very easy. All you need is a flat head screw driver to release the tweeter from the nest.
After this use your imagination how to fix the tweeter. I used hot...
I have found new rattle source.
Rotational button (knob) on the speedometer. It can touch the plastic glass and create the rattle noise.
The problem can be easily solved by adding the rubber ring. On the picture below the ring is already on the place.
How do you like shallow focal subwoofer. I had it and I didnt like the sound. According to the specification it requires 18l to perform well. Smaller box will not be a optimal for this speaker. The sound ifrom small box is too boomy imho. What is your opinion.
BTW i changed it for 8 inch jl...
Recently, I did some modification in my trunk. I put the mono amplifier and one JL Audio 8w3v3-4.
I am quite happy with the result. The bass is more than noticeable and what is important - I kept the trunk functionality.