Search results

Hey CivicX Fam! I recently replaced my OEM front sway bar end links with the more beefy Whitelines. While working on the install I realized that I had my coilovers on the wrong sides. That explains how the OEM ones when from 1 piece to several pieces since the coilover came into contract with...

Hey 10genfam! I need to splice into the throttle position sensor in order for my nitrous control module to learn what WOT is relative to my car. I understand at a very basic level some wiring and the diagrams related. I have a repair/wiring manual for these civics but am still lost as to which...

Hey CivicX Fam, I was messing with some ideas since we don't have an aftermarket for civic coupe taillights. After some fun in photoshop, I wondered what the coupe would look like without the center LED strip since mine doesn't work anyways and it's like $300+ to replace. Here's what I came up...

Hey CivicX Fam, I was up looking up car parts as I frequently do and came across a neat fender exit exhaust setup on an older boosted civic. That got me thinking, even though I am not running boost (NA 2.slow life) what would a fender exit exhaust setup save in weight, gain in horsepower/tq if...

Good Evening 10thgen Fam, I read the PRL Article about spark plugs for the 1.5L SI shop car they were using. I know they have a ton of performance mods (I think this may have been before the 150hp nitrous shot but honestly not sure). Long story short I'm looking to see if there's 2 step...

I recently purchased a Zex Safe Wet Nitrous Kit with 35-100hp nozzles. I have a blow down tube, bottle heater, etc. I'm wondering where a good place to tap into the fuel line would be? I have the 2.0 NA engine and it's multipoint port injected. It's recommended to place the nozzle 6-18 inches...

I know this might be a shot in the dark but I'm looking for 16 inch RPF1's. The specific specs are 16x8 - 38 - 5x114.3 - 73 in F1 Silver if anyone is selling their set let me know. I don't want the 17's unless the price is right; trying to go as light as possible without annihilating the bank...

Hello Civic Fam! I thought I'd share what my civic coupe looked like with the Vulcan Red Window Tint so anyone else considering it can see what the finished product looks like. I didn't tint the windshield red because I wouldn't be able to see out of it at all at night but did tint it to 20% to...

Good Evening 10th Gen Fam, I've been working weight reduction for my civic and have recently removed the door panels on the driver and passenger sides. While removing the passenger side panel, I removed the connector for the passenger side controls (I have a 2018 civic coupe LX-P 2.0) and...

Hey 10th Gen. I have some 2.slow parts I'm going to be selling and wanted to sell them to anyone in need here rather than Facebook marketplace first. Up for grabs are the following: Brand new black grill: $50 OEM Headlights: $200 Catalytic Converter with heat shield & gasket: $600 OEM...

Hey CivicX Fam. I've been removing items from my car for an upcoming event. This includes panels, rear seats, trunk components, etc. Underneath a lot of the covers is this black sound deadening-like material that is a pain to remove. Are there any easy solution to removing it? Picture is what...

Good Evening 10th Gen Fam, Does anyone know who/where I'd be able to custom order a set of aftermarket taillights for the civic coupe? I've scoured the Internet with no luck since the coupes are a North American only variant. I don't mind paying for a custom 1 off set from a reputable...

Hey all! I've been modifying my civic for awhile trying to improve its performance any way I can. Unfortunately I'm stuck with the K20C2 out of the 2018 LX-P model with CVT. Long story short, I'm looking at easy ways to cut down on weight (yes a diet is a good idea too). For those that have gone...

As the title suggests, I would like to paint my valve cover wrinkle red to match some of the pieces I'll be adding to my engine bay. I've looked for guides/videos on how to remove the valve cover but it's only for the 1.5T L15B7 engines. Has anyone painted theirs on their 2.slow? Any info/pics...

I have a 2018 Civic LX-P Coupe. I'm looking to tint the taillights (yes I understand all the reasons I shouldn't). Truth be told March 1st tint is no longer a primary offence to being pulled in VA (along with a slew of other offenses). That being said, I love the look of a blacked out civic...

So I recently purchased FKX's Ram Air Intake for the 2.0 N/A K20C2 Civic and I'm pretty impressed with how things turned out. I haven't driven in the rain yet so I cannot comment about how it is during the rain but I can say that with my supporting mods (RV6 Non-catted Downpipe, KTuner Base Map...

As the title suggests I'm looking for a couple mods to crack the 200hp range on my 2.slow K20C2 engine. I understand the aftermarket support for this engine is quite scarce but I want to ask if anyone has had any luck with some mods besides the ones I already have. Here are my current...