I m tuning my car by myself. I also send catalogs and calibration to hondata. I think there is something that hondata did limit on the calibration who users can not see it.
Hi everyone. I got some issue about boost command dropping
İn the attachment you will see the calibration and datalog which i m trying to find the solution for boost pressure drops
Around 4000 rpm bpcmd is 27-27.5 psi
But
When engine rpm goes from 4000 to 6000, it drops 25.2 psi.
I want to...
Hi everyone.
I just bought a new device which is pgear p610 to see 100-200km rolling.
Has anyone checked 100-200 time? Share results to see each others.
i found oem fk8 exhaust and its fully bolt on.
Just a little bit rear bumper need to cut some
i also found oem fk8 exhaust and i made the same things. The sound is so good.
Hi, Yes i m running meth kit. and its so good. but need to fine tune with afr.
generally 50-50 mixture use but i found 30meth-70water is the best gain in my car.
if you think about it just a tip for you.
hi everyone,
its time to change my tires. i have got enkei evo 9gsr rims which is 17-8 et38 and i want to use 255-40-17 tires on it. Many evo8-9 users have that tire and they are happy with it.
Is there anyone use it?
i guess in high load (wot) for cvt, oil temps rises so high. As you know cvt oil needs to stay in working temps. Our oem cooler is located in front bumper driver sides. Its not getting air directly.
I also bought that lufi xf. And i have oem cvt cooler with additional custom 7inch cooler fan. I am waiting to see it about cvt temps for normal driving and wot driving. if cooler fan is useful, i will share the results.
hi everyone,
I found that in the new software is allow to change excam settings.
I changed excam settings from 15 to 20 in high rpms then i logged it.
In the log there is no changing affects. In the attachment you will see it.
Any comments
Hi. I had the same issue and i found a solution.
First of all you need to cut oem parst for washer then you can use arp and oem washer together which means double washer. For using double washer, there is no problem at all. Or you can buy another washer if you dont want to cut oem bolts.