My GTI had the same 'dilution' issue come up. It is part of being a direct injection motor. I am not saying it is a good thing but I also think it may be a bit overblown. I would avoid short trips in cold weather and make sure you allow the motor to reach operating temp.
My wife's 2020...
Honda Owner for 30 years. Most driven until the wheels fell off miles before being sold or handed down to kids/family. Not one of them was trouble free but nothing that I thought was out of the ordinary.
tl;dr - all cars have issues but below is my history of my cars and their major issues...
Hi @edgeautosport.com ,
First off, love the videos! They are very informative and are a great resource for this community.
I want to get a downpipe installed on my '19 Si Sedan but I am apprehensive to do the job myself due to the stud issue. Your shop is close to me and I would be curious...
Same as above. Have lived in CO for 15 years and have ran Blizzaks (different models) on all my cars. My BMW 335 AWD was a tank on those tires. I have also ran them on 3 different civics, a GTI, and a Camry. For around the city, I think they are a bit of an overkill, for most winters here, but...
Vehicle: 2019 Civic Si sedan
Total tuned time: 1 hour
Tuned miles driven: 0
Tuning device(s) used: KTuner V1.2
Tunes used: Flashed KTuner Dual Starter 21 w/o making any changes; Phearable Stage 1.5 will be flashed when I get my CAI installed
Fuel used: 91 octane because I don't have 93...
I have had a problem finding someone with a large enough printer. All my friends printers can't print that big and the free ones at the library can't do it either. I am going to have my buddy print it in 2 sections and then see about fusing them together somehow. It shouldn't cost more than a...
Doing this sub install right now. Of course, I see this thread is updated after I just finished cutting up the OEM one...lol. How much for one of those brackets? I don't have a 3D printer but could try and see if someone will let me use theirs if it is easier to share the file.
I have buddy that lives in Ozark. Let me see if I can convince him to grab that exhaust, as I visit him frequently, or if you want to give me a shipping quote to 80022, that could be an option as well. Thanks!
I just noticed that my 2019 Si is making noise when I have the A/C on. I haven't really ran the A/C because it has been cold but I needed to turn on the defroster while in the drive-thru and I heard this odd noise that goes on and off every few seconds. Turned off the A/C and the noise went...
Hi, @KTuner - I live at 5480ft above sea level and looking to get v1.2 to help add a little more boost as the elevation robs me of a couple pounds. 91 octane is the highest we have here. I don't plan on modding the car too much beyond the tune. Do you think I would still benefit from a tune...