Have you tried flashing just a stock calibration i.e " factory " and no adjustments. Atleast then you can rule out any added boost increases or features ?
I had the same experience when i had flashpro. I had the +6psi tune on my non si and set the TC limits just over my boost table but it was not enough and the dash lit up with every warning light.
I had previously enabled some new features and overshot the limit like " increase fuel pressure"...
I completly agree with you on the shipping from US will cost alot for us in uk & EU.
Where are the clutchmasters brand based? I have heard of these FX350's and it seems a good option if it supports oem flywheel as i dont really want to replace this if nothing is wrong with it ( touch wood *)...
Hello EU friends!
Ive recently started to notice on cold starts my clutch is slipping when pulling off at lights and apperently its early stages of clutch wear or moisture on plates etc..
Thinking of upgrading to a stronger one but with oem feel as eventually i will be aiming for higher...
I too get this on a cold start until the engine is fully warmed up, its almost asthough you dont have enough throttle but when you apply more it feels like your just riding the clutch!
If i have rev hang disabled on standard padding, thats when its at its worst, the other day i changed to...
I had to do a datalogg of my cold start idle until upto temp, then part throttle drive 15 mins, then highway driving 15mins, then a 3rd gear pull from 2000rpm to redline, and do this for every revision. Then on final revision do 1-2-3 gear full throttle.
Best way to do it i would say :) (...
For the race maf, do you pre-select it under " maf scaling" options or is their a basemap that says " prl cobra race scaled maf" ?
In my experience previously with prl race maf on ktuner, selecting the " race maf calibration" under maf scaling was just enough to get me to the dyno, it then had...
I too am seeing haze/light swirls on my paintwork especially after waxing it, they have shown up alot!
Im thinking a light compound with machine polish should clear them up then apply some ceramic coating :)
In my experience with OTS tunes, here in the UK they are not safe. Our ecu's depend on top end of maf scale during WOT and because we cant adjust this, it runs too rich.
Basemaps are the same also, on ktuner we can choose all options from stage 1,2 , 16.5,18,21dual but we all run rich during...
Hi guys,
Looking into a downpipe option for my new 1.5 civic sport plus.
Catted - ok for emissions? Still get good gains?
Catless - can modern engines get away without a cat now during emisssions tests?
What brand is people running?
Thanks
Hi all!
I thought i would try here before going onto ebay:
I have for sale the following:
1x Ark catback exhaust fk7 fitted
For 2000 miles £600.00 ono plus shipping and charges
1x 27won RMM fitted for 1000 miles - £100.00 ono plus shipping and charges
1x mugen wind deflectors for fk7...
All US made or Japanese catbacks fit the uk fk7 dude. I owned a greddy sp and now run an ark exhaust / custom modified (bigger tips and no mid silencer)
** EDIT ** ordered the 40 series delta flow version with 1 in 2 out as 2.25" so will take photos when arrived :D :D it will be being v-band fitted to the oem mid section as stated earlier and i will have 4" jap cut tips fitted to it to finish it off. i will keep updating as things happen!
*** edit **
so a buddy of mine had been eyeing up my Greddy sp for a while and decided to sell it on, however... i have been eyeing up flowmasters super 50 delta mufflers and really like the design and sound and luckily before i sold my Greddy i had managed to measure the size of everything...
Dude that looks awesome! How is the sound? Im currently running a greddy but 3inch piping is too much so thought i could use this muffler with stock mid section but i want an easy swap like you so i can put oem muffler back on if ever sell it. With those V-clamps do you have to weld the insert...
i am thinking of going custom on my exhaust setup and i am thinking of keeping my stock mid section and then attaching either this Greddy sp back box to it or going for a vibrant back box with similar tips to the Greddy!
has anyone done this at all? i have attached some photos to show but i am...
I feel your pain bro! Cant say the same for my british weather but some days i feel like the nvh is bedding in and some drives im like f*ck this i cant be doing with it. It even made my ark exhaust sound deep and droney to the point where i couldnt even hear any pops!
I had to re modify my...
Just thought i would share my experience. So in december last year i had the 27won rmm fitted and my god was it a different car! It felt like a whole different car even the driving style had to change as i struggled to know whens best to shift or if im in too high of a gear there was that much...