Sold my car so I'm selling my Hondata or trade for a crv one. I released from the car but I didn't check the sell Hondata box. ?? If the buyer needs password or anything I will support this unit, but it should be good to go. I can give the buyer my password to the Hondata sotfware if needed...
Nothing good about Honda's anymore. They're garbage. And they don't cover their crap! My AC compressor clutch just went in my 2017 hatch. Not covered they said. Well I have an old 2015 corolla with ice cold AC in it with 289Km on it. Never been worked on. Paint is fine too.
I sent out all the pins I had across the country.. well across North America .. I hope everyone will be able to get their mod to work. Bring on the rain !! Cheers peeps
it'll slow down when you stop but theres a feature that (and you'll notice it) when you let go of the brake the wiper does one swipe, regardless of where the timer is between swipes. that setting is there to wipe the window because the driver is ready to move forward.
Yes, you can unplug that beige connector up off the BCM (can’t remember the number of it) and get that wire down far enough to work on the plug comfortably.
Yeah that’s exactly what I was thinking ... probably get at it this summer. Thanks for the link. It confirms that I can in fact do it. I was wondering if I had enough space to do it.
I’m in Canada (east coast) so it would be better if I could find something close by...
I might just try to fabricate something myself after all. I don’t want to chop the trunk on a new(ish) car.....
Thanks guys
Hi guys,
Haven’t been on here for months...
I’m looking for a Hatchback sport muffler. I want to change the boring rear end on my LX. Wondering if anyone here did the change? Details
that should work as I did it myself. The worse part is to access the BCM. I did it by cutting zip ties and electrical tape that holds the wiring together and I was able to pull that connector (the beige or tan coloured one) down to the clutch pedal so I could work on it. Also be careful with the...
The pins I got are 100% same as the ones that are there. They fit in the plug connectors without any mods to the pins or the plug.
You just have to be careful when putting them in. You gotta make sure they’re in all the way.
I have them on my hatch love them. Wheels are 18 7.5 tires are 215-45-18 plenty of room never rubbed. I’m thinking about wheels spacers to bring them out a little.