Search results

Are there people that had their Input shaft bearing fail /make noise? I only have 80000km daily drive my car and occasionally have some WOT runs on the highway.My ISB bearing started to make a whine noise lately. A few 1000km ago changed transmission oil with amsoil .Never noticed the noise...

Does anyone here use Endless mx72 pads all year around also in winter weather? I like to get these pads but have seen a few reviews of people saying they leave deposits on the brake disc and even rust in winter weather?They work fine with warmer weather .

So i've been looking into using the front fog light as a ram air/ Cold air source to feed air for my intake. We all know this comes with the risk of water getting sucked up as it rains or even worse hydrolock driving true a big water puddle. After some research i've found 2 options so far : 1)...

Has anyone ever removed their fog lights permanently? Does it need to have a resistor in place for it to not throw a code? I'm thinking of removing the fog lights and installing a cold air feed in place.I never use the fog lights and they are already pretty much sandblasted from all the highway...

Are there FK8 owners who replaced their stock upper engine mounts because the oem rubber bushings was cracked? I'm currently looking into maybe installing oem fk8 mounts into my 2018 civic sedan 1.5T .My Oem mounts are fluid filled and stock type R are rubber . After searching for some low...

Does anybody know if the fk8 motor mounts (left and right) also fit on a 1.5T 10th gen? I know the lower torque mount fits and that all the bolts from the upper motor mounts are exactly the same between the fk8 and a regular civic 10th gen .The normal civic has fluid filled motor mounts and...

So I recently saw a post of the guys from Honed who tested the front macpherson suspension on the GD3 jazz/fit .Which showed that it actually gained positive camber when the suspension got compressed.In comparison the old eg/ek civic with double wishbones always gained negative camber. This...

I'm looking for a Oem SI rear swaybar. Looking for someone who can ship this outside the USA true ebay with the ebay global shipping program. I have used this several times and bought several other parts from users on here before all without any problems. You only need to ship to a shipping...

I still have a PRL short ram intake for 1.5T (street maf) with a brand new Sprint filter cone filter for sale if anyone is looking for one in europe?I used this intake a couple of times for testing ,the filter is used 1 or 2 times and is nearly new. I can ship true whole of europe ,i'm from...

Does anyone else have problems with the OEM GPS acting up and giving a bad gps signal? My gps worked perfectly up until a few weeks ago.When riding the gps signal is aprox. 100meters to the right of where i am. Which results my gps constantly saying to take another route or turn around and so...

I know this has been asked several times but i havent found anyone giving a clear answer . Last weekend i needed to do a oil change and tried to install an universal flat oil sandwich adaptor to install my oil temp and pressure sensors. The 1.5T engine has no room for the sensors without using...

Has anybody that is lowered used extended ball joints and/or tie rod ends? I know spoon offers them both and hardrace also offers a bump steer correction kit that extends the lower ball joint with a spacer. For the fk7 the spoons are extended 11mm the hardrace ones are 15mm .Spoon says it is...

Hi is anyone else noticing the lowering springs for the 10th gen civic are getting discontinued everywhere ? A few months ago i looked into lowering springs and Eibach , H&R and ST all had lowering springs available. Now i wanted to order the ST lowering springs but they are removed from their...

For those that do their own maintenance what milage do you guys hold on to? I've been looking into the oem maintenance shedule but it's rediculous what honda says. For regular car usage: - Engine oil 20 000km - Transmission oil 120 000km??! - Spark plugs 120 000km - Brake oil every 3 years -...

So i've been having this idea for a long time but never got around to check this because we never got a 10th gen accord in europe. The 10thgen accord has a aluminium front lower control arm which uses the same front compliance bushings as the 10th gen civic .And it also uses 12mm nuts to connect...

Since honda nowadays sources different brand names to make their oil filters and hamp is getting discontinued, I started to look into a aftermarket alternative. The high cost (aprox. 19euro ) For a crappy filter doesn't give me confidence into buying oem honda. Honda used to use Tokyo Roki or...

On my old 6th gen civic i always used Mobil one super 2000 10w40 which was always a great semi synthetic oil. Now for the 10th gen my warranty is over and i want to do my oil changes on my own again. The honda 0w20 oil is ridicously expensive so i rather use good brand name that is easy to get...

Is anybody using the ST lowering springs ?I noticed in the USA they are only available for the Type R but in europe they are also available for the 1.5t hatch and sedan.They lower the car 30mm ( 1.2" ) front and rear and from what i can calculate the fronts have a lineair spring rate of 3.2kg...

I'm currently looking into replacing my oem brake pads. For the European civic 1.5t sedan there are almost no aftermarket brands that make them except Ebc.Ebc only makes greenstuff or Yellowstuff brake pads for my model. I know some have used Yellowstuff on here but are there people who used the...

Can anybody help me out?I'm looking for measurements of the whiteline lowering springs. I think since these are also made in germany and they have the exact specs as H&R lowering springs that they are the same. Whiteline doesn't give out any other specs other then the springrate.H&R germany...