70K ON THE FACTORY GOODYEARS....DWS06 PLUS CONTI JUST REPLACED...STILL AT 7/32 TREAD ON THE STOCKS WHEN PULLED....ONLY ROTATED ONCE...FACTORY ALIGNMENT STILL....JUST WERE FINALLY STARTING TO GET NOISY....
ABSOLUTELY IN LOVE WITH THE DWS06+
In a sense your not wrong. My ignorance of what would be available to use vs long term effects of things like deleting rev hang and assuming that when you disable it the software would also trim or lower the injector on time during the shift as well (it doesnt btw...causes a slight rich...
Vehicle: 2020 Si Coupe
Total tuned time: just done
Tuned miles driven: about 300 so far starting at ~69,000 on odometer
Tuning device(s) used: Hondata
Tunes used: CARB +6 base map
Fuel used: 93 pump gas
Additional related mods: Drop in air filter
Problems/issues: no
Driving style: gas...
This is not true........
The shuddering is the clutch disk skipping over imperfections in the flywheel surface (hot spots etc.) .... when warm or driven a few miles, it becomes unnoticeable... both my 2018 and my 2020 did this very minimally from early mileage....my 20 has 70k on it now.... had...
Everything like this is manufactured since late 2019. Toilet paper, elections, illnesses.
They are too obvious with it anymore but the masses are dim enough now not to question.
https://patents.google.com/patent/US7137377B2/en
In direct spark ignition engines, fuel is injected directly into each combustion chamber. Accordingly, less fuel may be inducted past the intake valves than in port injected engines. Inducting fuel past the valves cleans carbon deposits which may...
Just needed to correct you on this part....not one time have a charged or attempted to sell any file to anyone. I OFFERED the file I had to anyone who asked. Assisted anyone who reached out to me for assistance. If the op was using a hondata unit I would have already offered to fix the issue for...
I guess some confusion in that term post turbo as that is downpipe exhaust traditionally speaking. I should have said post compressor wheel/ pre throttle body I guess...lol... I am referring to the intercooler.
A datalog would tell the true map reading which as stated would help.
From my...
"Will work" and "designed to be used with" are two different things.
Derek has said it before that it was developed on a factory vehicle.
Can it be used with quality bolt ons? Of course.
Can certain combinations of bolt ons create issues? Obviously.
Im just telling you there isnt anything...
The intercooler/intake are the problem. That tune file wasnt really designed for bolt on cars (albeit people frequently use it with bolt ons- the degree of issues or not is subject to differences in each individual setup). If you had a hardware issue that was the "cars" fault then it would be...