New stealth mute button for my radar detector.
Used the lanewatch button on the turn signal stalk as the mute button.
35255-T2A-X42
Wire the mute wiring to pin 3 and 4 using M34S75C4F2 for the pins.
Also repaired the rj11 on the uniden. Seems to constantly disconnect on the original rj11...
At the bare minimum remove the speakers. It's stupidly easily to find if you keep it on there. They get presented with the play sound option on their phone.
https://www.groovypost.com/wp-content/uploads/2022/03/AirTag-tracking-in-Find-My-app.png
Also another thing is you attract other kind...
If it's squeaking you gotta relube the clutch slave cylinder with high temp grease (08798-9002)
Remove airbox and unbolt those two bolts (shown above) should come right out and just clean and relube the pin.
Your phone probably didn't pick up the sound since it's coming from there.
All the stock gasket are round
https://www.hondapartsnow.com/parts-list/2019-honda-civic--5dr_type_r_touring-ka_6mt/electrical_exhaust_heater_fuel/exhaust_pipe_muffler.html
downpipe side 18393-SDB-A00
exhaust side 18303-T2B-A01
The triangular shaped ones are aftermarket gaskets...
https://www.digikey.com/en/products/filter/rectangular-connectors/rectangular-connector-housings/319
Since you have the time you can try to look for the connector lol